Evaluation of the dimensional changes of acrylic resin for complete denture submitted to different types of processing evaluated to the level of the condyle / "Avaliação dos efeitos da alteração dimensional de resinas para base de próteses totais submetidas a diferentes técnicas de processamento avaliados ao nível condilar"

AUTOR(ES)

Flavio Jun Yamaguchi

DATA DE PUBLICAÇÃO

2006

RESUMO

The objective of this study is to evaluate the dimensional acrylic resin alterations submitted to different types of processing evaluated to the level of the condyle. The experimental conditions were introduced in three stages. In stage A , the acrylic resins (Classic, Ondacryl, Acron MC, Lucitone and QC-20) were enclosed in flasks contend plaster wall, pressed in the plastic phase and submitted to five cycles of acrylization. In stage B, the QC-20 and the Lucitone were used with three types of wall (plaster, silicone (ZETALABOR) and silicone film (VIPISIL)), and with two phases of chemical reaction of the acrylic resin (fluid and plastic). In stage C, the resin Acron MC with two cycles of polymerization was used (90W for thirteen minutes and 500W for three minutes) by changing the type of wall as in stage B. For the study, 5 complete dentures for each group were made. At the end of the experiment, 23 groups were obtained, totalizing 115 superior complete dentures. Positional variation of the upper member of the articulator T.T.was measured before and after the processing, based on the maximum intercuspidation orientation. Such variation was registered by using plaster type IV shed in the space around of the condyle spheres, previously provided by means of spacers used before the processing. Three distances in each condyle sphere were measured (superoinferior, anteroposterior and mediolateral) resulting in 690 measures that varied from 0 to 3 mm, with average of 0,79 mm and shunting line standard of 0,59 mm. An alteration in 687 measures occurred and there was difference between the groups statistically significant, mainly for the anteroposterior distance on the left side. The conclusion was that the dimensional resin alterations modified the positions of the condyle spheres

ASSUNTO(S)

complete dentures acrilization acrilização acrylic resin prótese total resina acrílica

Documentos Relacionados

• Avaliação in vitro das variações posicionais da cabeça da mandíbula na fossa articular decorrentes da alteração dimensional de resinas acrílicas para base de prótese total submetidas a diferentes técnicas de processamento
• The processing of complete denture: influence of four techniques in artificial teeth movement.
• "Estudo das resinas acrílicas para bases de próteses totais com relação à resistência flexural, e à quantidade de monômero residual superficial"
• Effect of microwave treatments on dimensional accuracy of maxillary acrylic resin denture base
• "Avaliação da alteração dimensional da base de prova permanente da prótese total de resina acrílica ativada termicamente, processada em forno microondas, por meio da imagem digital"