Estudo Experimental de um Dessalinizador TÃrmico com Aquecimento Controlado / Experimental Study of a Thermal Desalination with Controlled Heating

AUTOR(ES)
FONTE

IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia

DATA DE PUBLICAÇÃO

15/03/2011

RESUMO

Solar desalination systems operate with a transient heat source, the solar radiation, what makes it difficult to identify of the influence of the process variables and the constructive geometric parameters of the desalination tower. The present work presents the experimental study of thermal a desalination system prototype with heat recovery mechanism and controlled power supply to operate in transient and steady-state regimes. This prototype made possible the study of the operarational parameters that influence the desalinated water production in the tower, namely, the height of the water column in the storage tank, the type of burner, the gas natural gas flow, the number of desalination stages, and the use of a nano film of the condensations surface. Additionally,it was possible to thermally characterize the dessalination tower by determining the experimental overall heat transfer coeddicient (K1) of the simultaneous evaporation, radiation, and the convection processes between the surface of the water in the tank and the condensation walls of the first stage immediately above. The desalination system consisted of a gas natural burning equipment, a tank of storage, and a tower with six desalination stages. By controlling the natural gas flow, it was possible to keep preset and constant operating temperatures. The results showed that the use of the linear burner (ideal burner) and of 6 liters of water in the tank of storage presented the best desalinated water production. They alson showed that the flow of 0,533 g/min of natural gas and the use of 6 or 7 desalination stages are more adequate for tower operation. With the experimental measurements, the determination of the performance coefficient (COP) and of the gain output ratio (GOR) was possible. These values were 4,09 and 5,91, respectively. An increase of 65,59% in the desalinated water production was measured with the use of the nano film; however, chemical tests to verify possible chemical contamination were not carried out.

ASSUNTO(S)

engenharia mecanica dessalinizaÃÃo da Ãgua gÃs natural thermal dessalizador natural gas use operational parameters

ACESSO AO ARTIGO

Documentos Relacionados