Estudo do efeito dos parametros fisicos e quimicos de adsorvente solido no processo de adsorção de SO2 em calcario
AUTOR(ES)
Angela Mitsuyo Hayashi
DATA DE PUBLICAÇÃO
1996
RESUMO
The process of energy generation, in special, the fluidized bed combustion, is responsible for gas emission to the atmosphere, generating serious enviroment problems. With the aim to minimize this emission, it has been used the solid alkaline injection, usually the limestone, during the fossil fuel bum. The efficiency of the S02 removal process, through the limestone thermal decomposition and reaction with the gas, depends, basically, on the characteristics of the reactant solid developed in the calcination step. The physical parameters that affect the calcinated limestone changes with the operational conditions used in the process. This work was developed in a fixed bed experimental system and analyzed the influence of the limestone type, the calcination temperature and the calcination time, by study of calcinated limestone physical parameters such as specific area, porosity andpore size distributiOD.Two types of limestone were used, Calcitic and Dolomitc, like sorbent. The calcination took placed at temperature between 850 - 950°C and reacting times of 60 to 180 minutes, according to a experimental design. After the physical structure characterization, the calcined solids were then sulfated at 850°C and 120minutes, in order to evaluate the capacity of802 removal of these solids. The results obtained from the experimental design used in this work show that the limestone type and the calcination temperature are the most relevant factors in the calcinated physical structure changes. However, when the S02 removal capacity of these solids were analyzed, we observed that the limestone type affects the conversion significantly
ASSUNTO(S)
adsorção dessulfuração oxidos de enxofre calcario
ACESSO AO ARTIGO
http://libdigi.unicamp.br/document/?code=vtls000114380Documentos Relacionados
- Adsorção de fósforo em dez solos do estado de Pernambuco e suas relações com parâmetros físicos e químicos
- Desenvolvimento de unidade experimental de leite fluidizado circulante para o estudo do processo de remoção de SO2 na combustão de carvão mineral com a adição de calcario
- Efeito dos tratamentos físicos e químicos no resíduo de lixadeira do algodão
- Estudo experimental do desempenho do ciclone lavador na absorção de SO2
- Estudo dos canais de dissociação das moleculas CS2 e SO2 apos fotoexcitação em torno da borda 1s do enxofre