Estudo da viabilização da incorporação do pó de exaustão em massa cerâmica

AUTOR(ES)
DATA DE PUBLICAÇÃO

2009

RESUMO

Inside the context of alternative search for the use of industrial waste as natural raw for the industrial ceramic, this work had the objective to evaluate the possibility of the use of exhauster powder generated in the foundry process. The characterization was performed by scanning electron microscopy, x-ray difratometry and thermal analysis (ATD, TG) noting that it is a powder with a high content of fine and compatible with the composition of ceramic bodies. Formulations were prepared with different exhauster powder content. The sintered materials at 1000, 1100 and 1200oC were characterized according technological properties as water absorption, linear shrinkage, bulk density. Microstructural analysis was carried out by scanning electron microscopy and X-ray diffraction. The results showed that it is possible to use the waste. It was observed that the waste increase the density in sintering process, and with high levels of waste occurs an increase of the porosity and intensification in the color of the new material. According to the results obtained in preliminary stage set up the methodology of work for the development of new materialThe second stage were developed new formulations prepared with different exhauster powder content, based on the preliminary stage of research and using as criterion the behavior after sintered. This new material were characterization by thermal analysis (ATD, TG), and some technological properties such as water absorption, linear shrinkage, bulk density. Finally were tests for resistance to bending, resistance to abrasion than the morphological analysis.The results showed the new material can be used as ceramic tiles, for, in general no significant changes its physical and mechanical studied of ceramic body exhauster powder content in relation to the samples only with the mass, and all the compositions are within the minimum required for the characteristics analyzed.

ASSUNTO(S)

pó de exaustão ceramica exhauster powder wastes industrial material ceramics subprodutos industriais revestimentos cerâmicos

ACESSO AO ARTIGO

Documentos Relacionados