Estudo da adesão liga (Ni-Cr)-porcelana em protese dentaria
AUTOR(ES)
Beatriz Luci Fernandes
DATA DE PUBLICAÇÃO
1992
RESUMO
The main purpose of this s wore was the study of adherence between nickel-chromic um alloys and parcel al n for use in dental restorations. A detailed bibliographic revision was performed and two commercial nickel-chromium alloys was selected. one of them with low concentration of beryllium. Hardness test microstructural analysis of the all oys analysis of the ceramic-alloys interface by optical and electronic microscopy. four-point?s bending in the metal-ceramic systems and analysis of the affinity alloy-ceramic was carried out. Special apparatus were designed allowing to. evaluate the metal-ceramic bond strength. and ceramic wet ability. The niclcel-chromium-berilium alloy showed better fit. than the nickel-chromium alloy. The banding test. was repeatable and wetting test. was appropriate to determine the affinity between both materials
ASSUNTO(S)
materiais engenharia mecanica protese dentaria
ACESSO AO ARTIGO
http://libdigi.unicamp.br/document/?code=vtls000049768Documentos Relacionados
- Comportamento tribocorrosivo de sistemas metalocerâmicos odontológicos de Ni-Cr/porcelana e Ni-Cr/Ti/porcelana
- Caracterização Microestrutural e Tribocorrosiva de Sistemas Metalocerâmicos Odontológicos do Tipo Ni-Cr/Porcelana E Ni-Cr/Ti/Porcelana
- Determinação da microdureza Vickers e caracterização microestrutural das ligas de NiCr, NiCrBe, NiCrTi fundidas sob diferentes condições de fundição com reaproveitamento total ou parcial de liga
- Estudo da sinterização de uma liga Fe-22,5Cr-5,5Ni obtida pela mistura de pós elementares
- Pilot study of the adhesion between Ni-Cr alloys and ceramics when prosthetic variables were accomplish