Erosion-oxidation behavior of thermal sprayed Ni20Cr alloy and WC and Cr3C2 cermet coatings

AUTOR(ES)

Kunioshi, Clarice Terui, Correa, Olandir Vercino, Ramanathan, Lalgudi Venkataraman

FONTE

Materials Research

DATA DE PUBLICAÇÃO

2005-06

RESUMO

An apparatus to conduct high temperature erosion-oxidation studies up to 850 °C and with particle impact velocities up to 15 m.s-1 was designed and constructed in the Corrosion Laboratories of IPEN. The erosion-oxidation behavior of high velocity oxy fuel (HVOF) sprayed alloy and cermet coatings of Ni20Cr, WC 20Cr7Ni and Cr3C2 Ni20Cr on a steel substrate has been studied. Details of this apparatus and the erosion-oxidation behavior of these coatings are presented and discussed. The erosion-oxidation behavior of HVOF coated Cr3C2 25(Ni20Cr) was better than that of WC 20Cr7Ni, and the erosion-oxidation regimes have been identified for these coatings at particle impact velocity of 3.5 m.s-1, impact angle of 90° and temperatures in the range 500 to 850 °C.

Documentos Relacionados

• High Temperature Erosion-oxidation Resistance of Thermally Sprayed Nanostructured Cr3C2-25(Ni-20Cr) Coatings
• Oxidation and erosion-oxidation behavior of steels
• Microstructure and mechanical properties of thermal sprayed nanostructured Cr3C2-Ni20Cr coatings
• WC-CoCr coatings sprayed by high velocity oxygen-fuel (HVOF) flame on AA7050 aluminum alloy: electrochemical behavior in 3.5% NaCl solution
• High Temperature Oxidation Behavior of Yttrium Dioxide Coated Fe-20Cr Alloy