Elemento óptico difrativo de luz branca gerado por computador / White light computer-generated element

AUTOR(ES)
DATA DE PUBLICAÇÃO

2007

RESUMO

Holograms can be produced using traditional holography techniques or may be also generated by computer, which are known as CGHs(Computer-generated holograms). Most of these holograms operate using monochromatic light. On the other hand, holograms can also operate with white light. These white light holograms are used in several applications, such as security, to verify the autencity of credit cards end other documents, because their fabrication processes are dificult to reproduce and are expensive. However, convencional white light holograms operate based on reflection of light, and present some undesirable effects, like chromatic distortions, such as rainbow effect. In this work it was proposed a computer-generated phase optical difractive element designed to operate under white light illumination. The element is calculated based on the halftoning technique and in the partial spatial coherence of a white light extended source. Phase elements are manufactured using well-established integrated circuits fabrication techniques and optical simulations are shown. No iterative methods are necessary. Simulated and optical reconstructions results are very similar and produce good clear images, and no chromatic distortions are observed. The white light element was not yet described on literature, and some of its applications may be an optical correlator or holographic art. This work was carried at the laboratory of optics of the department of electrical engineering of the EESC, and supported by CAPES (Coordenadoria de Aperfeiçoamento dePessoal de Nível Superior).

ASSUNTO(S)

halftoning white light halftoning computer-generated holograms luz branca hologramas gerados por computador

ACESSO AO ARTIGO

Documentos Relacionados