Effect of cooling slope and manganese on the microstructure of hypereutectic Al-Si alloy with 2 %Fe
AUTOR(ES)
Lu, Li, Zhou, Rongfeng, Lu, Dehong, Jiang, Yehua, Zhou, Rong
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
06/12/2013
RESUMO
The effect of cooling slope (CS) on the microstructure of hypereutectic Al-22Si-2Fe (% w/w) alloys with 0%, 0.99%, and 1.36% Mn were studied. The results showed that primary Si particles (PSPs), needle-like Fe phases, coarse fishbone-shaped α-Al15(Fe, Mn)3Si2 phases, and eutectic Si could be refined. With such a CS process, the intermetallic compounds in the alloys with different Mn/Fe ratios were examined with an optical microscope, scanning electron microscope, and X-ray diffraction. Moreover, the acicular δ-Al4(Fe, Mn)Si2 and blocky α-Al15(Fe, Mn)3Si2 phases were analyzed by transmission electron microscopy.
Documentos Relacionados
- Study of Mechanical and Wear Behaviour of Hyper-Eutectic Al-Si Automotive Alloy Through Fe, Ni and Cr Addition
- Effect of Rapid Solidification and Addition of Cu3P on the Mechanical Properties of Hypereutectic Al-Si Alloys
- Solidification microstructure, mechanical and wear resitances of Al-Sn and Al-Si alloys
- Solidification thermal variables, microstructure and mechanical properties of hypoeutetic Al-Si alloys
- Modificação microestrutural da liga Al-Si 380 conformada por spray com a co-injeção de partículas contendo fases intermetálicas
