Efeito de adições ativas na mitigação das reações álcali-sílica e álcali-silicato. / Effect of mineral admixtures in controlling the alkali-silica reaction and alkali-silicate reaction.

AUTOR(ES)
DATA DE PUBLICAÇÃO

2007

RESUMO

The alkali-aggregate reaction is a pathologic manifestation that can induce the premature distress and loss in serviceability of concrete structures affected. It is directly associated to the selection of materials (cement, coarse and fine aggregates, water and additives), as the interaction between these materials and environmental condition will grant the concrete some of the properties related to its service life. The slow reaction between alkali hydroxides soluble in the liquid phase within concrete pores and reactive aggregates gives rise to a gel that piles up within concrete voids and the aggregate-paste interface. In presence of water, the gel expands and exerts internal pressure in the concrete. When the internal pressure exceeds the tensile strength, cracking may come up as result. The alkali-aggregate reaction requires the action of water, reactive aggregate and alkalis altogether. Prevention can be carried out by eliminating one of these factors, i.e. employing either inert aggregates or lowalkali cements, or keeping the concrete away from moisture. Otherwise, preventive measures must be taken when reactive aggregates are used in civil construction works, such as the use of low-alkali cements or composite cements bearing alkaliaggregate- reaction mitigating admixtures: blast-furnace slag, fly ash, metakaolin and silica fume, which are the object of the present research. The experimental work included the analysis of two potentially reactive aggregates to alkali hydroxides: basalt and granite milonite. The igneous basalt carries deleterious constituents such as glass, chloropheite (cryptocrystalline silica), that will give rise to the DONDOL_VLOLFD type reaction while the metamorphic granite milonite carries micro granular, recrystallized, undulate-extinction-bearing quartz and deformed feldspar grains, that give rise to DONDOL_VLOLFDWH type reaction. Aiming at evaluating how efficient in mitigating these reactions the active admixtures are, these aggregates were mixed with 16 composite cements. The contents of admixtures followed those usually found in Brazilian industrial cements for blast-furnace slag (15%, 30%, 45%, 60%) and fly ash (10%, 15%, 25%, 35%), and those generally added directly to concrete for metakaolin (5%, 10%, 15%, 20%) and silica fume (5%, 10%, 15%). All materials were characterized for their chemical composition, physical properties and mineralogy. Petrography was carried out on the aggregates. The mortar bars were analyzed at the scanning electronic and transmitted-light optical microscopes. Mercury-intrusion porosimetry and thermal analyses were carried out to quantify residual portlandite. The alkali content within the bars was determined in order to verify migration of Na+ ions. The results show that the efficiency of active admixtures varies according to their chemical and mineralogical composition and proportioning in cement, and to the aggregate reactivity.

ASSUNTO(S)

metakaolin basalt estruturas de concreto portland cement alkali-aggregate reaction fly ash silica fume milonite reação álcali-agregado (prevenção) blast-furnace slag

ACESSO AO ARTIGO

Documentos Relacionados