Drying of microalga Scenedesmus obliquus BR003 in a gas dryer at low temperatures

AUTOR(ES)
FONTE

Cienc. Rural

DATA DE PUBLICAÇÃO

04/07/2019

RESUMO

ABSTRACT: Development of efficient and specific equipment to dry microalgae is essential for commercial use of these microorganisms that show high growth rates and biotechnological potential. Drying costs of microalgae biomass are still high and they should be reduced for the production of compounds with low added value. Therefore, we evaluated the drying process of the microalga Scenedesmus obliquus BR003 using low temperatures. S. obliquus BR003 is a robust microalga that shows high lipid productivity. At laboratory scale, it was observed that the biomass of S. obliquus BR003 was rapidly dried at low temperatures between 50 and 60 ° C. A gas dryer was used to evaluate the drying of the biomass of S. obliquus BR003 on a pilot-scale. The biomass was dried in less than 24 h using the gas dryer; however, the high moisture of the microalga biomass required a higher air renovation in the drying chamber. Computational fluid dynamics analysis of the gas dryer showed two important parameters to achieve greater effectiveness of heat and mass transfer rates during the drying process of the microalga biomass. It was concluded that a gas dryer suitable for the microalgae biomass should have multiple air injection points, and an efficient circulation and renovation system of air inside the drying chamber.RESUMO: O desenvolvimento de equipamentos eficientes e específicos para a secagem de microalgas é essencial para a exploração comercial destes microrganismos que apresentam alta taxa de crescimento e grande potencial biotecnológico. Os custos de secagem da biomassa de microalgas ainda são elevados e precisam ser reduzidos para a produção de compostos com baixo valor agregado. Portanto, realizou-se o estudo da secagem da microalga Scenedesmus obliquus BR003 utilizando baixas temperaturas. S. obliquus BR003 é uma microalga robusta que apresenta alta produtividade de lipídeos. Em escala laboratorial, observou-se que a biomassa de S. obliquus BR003 foi rapidamente seca em baixas temperaturas entre 50 e 60 ºC. Um secador a gás foi utilizado para avaliar a secagem da biomassa de S. obliquus BR003 em escala piloto. A biomassa foi seca em menos de 24 h utilizando o secador a gás, entretanto, a elevada umidade da biomassa da microalga requereu uma maior renovação de ar na câmara do secador. A análise de fluidodinâmica computacional do secador a gás mostrou dois parâmetros importantes para se obter uma maior efetividade de transferência de calor e massa durante o processo de secagem da biomassa de microalga. Concluiu-se que um secador a gás adequado, para a biomassa de microalgas, deve possuir múltiplos pontos de injeção de ar, e um eficiente sistema de circulação e renovação de ar no interior da câmara de secagem.

Documentos Relacionados