Diseño y predicción del funcionamiento de inyectores Venturi en riego localizado
AUTOR(ES)
Manzano, Juan, Azevedo, Benito M. de, Bomfim, Guilherme V. do, Royuela, Álvaro, Palau, Carmen V., Viana, Thales V. de A.
FONTE
Rev. bras. eng. agríc. ambient.
DATA DE PUBLICAÇÃO
2014-12
RESUMO
The design and prediction performance of four Venturi injector prototypes have been studied using Computational Fluid Dynamics (CFD) techniques. Results were compared with experimental tests carried out in the laboratory of the Universitat Politècnica de València, Valencia, Spain. The analysed and selected geometries for each prototype were used to simulate the operation without nutrient injection (G1) and with nutrient injection (G2). In first case (G1), the results were presented in the form of pressure profile at the injector axe under different velocities and the pressure distribution in the whole geometry. Additionally, this paper analysed the evolution of pressures and head loss versus main water flow in the different prototypes. The relative error was estimated to compare CFD and experimental results. The second case (G2), the graphical representation for the relations between the nutrient aspiration flow and water main flow were obtained for numerical and experiment approaches. In conclusion, CFD techniques appear as a suitable tool for the analysis of the Venturi injector operation, but its validation with experimental data is recommended.
Documentos Relacionados
- Diseño y alternativas en la instalación de inyectores Venturi en riego localizado1
- Predicción del rendimiento en cortes, hueso y grasa en búfalos de agua en Venezuela
- Sustentabilidad del riego complementario en suelos Udipsament Típico y Hapludol Entico de Argentina
- Diseño, simulación y análisis del proceso de extrusión de un perfil termoplástico en PVC rígido para optimizar el diseño de la matriz y los parámetros
- Satisfacción con la atención en urgencias pediátricas: influencia del funcionamiento familiar y la alteración emocional