Determination of phases and residual stresses after martensitic transformation induced by rolling in 304L stainless steel

AUTOR(ES)
FONTE

Matéria (Rio J.)

DATA DE PUBLICAÇÃO

16/09/2019

RESUMO

RESUMO O aço inoxidável austenítico 304L é suscetível à transformação martensítica induzida por deformação. Esta transformação de fases depende da temperatura, assim como do modo, taxa e nível de deformação. Neste trabalho as fases e tensões residuais de um aço TRIP 304L, em que a transformação martensítica foi induzida por laminação a frio, foram investigadas por difração de raios-X (DRX). As análises foram realizadas em diferentes espessuras das amostras. Os resultados mostraram que a composição de fases e as tensões residuais são fortemente dependentes da espessura das amostras. Todas as amostras apresentaram tensão residual compressiva.ABSTRACT The 304L austenitic stainless steel is susceptible to deformation induced martensitic transformation. This phase transformation depends on the temperature as well as on the mode, rate and level of deformation. In this work the phases and residual stresses of a 304L TRIP steel where martensitic transformation was induced by cold rolling were investigated by X-ray diffraction XRD. The analyses were performed for different sample thicknesses. The results showed that the phase composition and the residual stresses are strongly dependent on sample thickness. All samples showed a compressive residual stress.

Documentos Relacionados