**Design of self-checking fully differential circuits and boards**

##### AUTOR(ES)

Lubaszewski, Marcelo Soares

##### DATA DE PUBLICAÇÃO

2011

##### RESUMO

A design methodology for on-line testing analog linear fully differential (FD) circuits is presented in this work. The test strategy is based on concurrently monitoring via an analog checker the common mode (CM) at the inputs of all amplifiers. The totally self-checking (TSC) goal is achieved for linear FD implementations provided that the checker CM threshold is small enough with respect to the specified margins of erroneous behavior in the circuit outputs. The design methodology is illustrated for a switched-capacitor biquadratic filter and the self-checking properties evaluated for a hard/soft-fault model. A large checker threshold of 100 mV of CM is chosen since the filter implementation does not minimize nonidealities (e.g., amplifier offsets or clock feedthrough) which result in significant CM components. The circuit outputs are accepted to deviate within a 10% band. With the implemented checker, the TSC goal is not achieved for some faults in narrow regions of the frequency band. For the worst case, a hard fault which results in a 31% deviation is undetected in only a narrow band of approximately 310 Hz. The circuit can be made TSC with a checker threshold of 40 mV and an accepted output deviation of 15%. This is, however, more demanding on the checker (which currently takes less than 3% of the total area and about 7.6% of the total power) and requires an improved filter implementation to reduce CM components. Our solution consists of relaxing a bit the TSC property of the functional block and applying a periodical off-line test to make the checker strongly code disjoint (SCD). This is easy to implement since an off-line test is also required for the checker. The checker outputs a double-rail error indication which ensures compatibility with digital checkers and makes the design of self-checking mixed signal circuits straightforward. The circuit-level mixed-signal approach is extended to the board level by means of the IEEE Std. 1149.1 digital test bus.

##### ASSUNTO(S)

boundary scan circuitos integrados fully differential circuits microeletronica mixedsignal test safety applications self-checking systems

### ACESSO AO ARTIGO

http://hdl.handle.net/10183/27566##### Documentos *Relacionados*

- UM MICROCOMPUTADOR AUTO-DIAGNOSTICÁVEL
- A self-checking scheme to mitigate single event upset effects in SRAM-based FPAAs
- Recruitment of the ArgR/Mcm1p repressor is stimulated by the activator Gcn4p: A self-checking activation mechanism
- Circuits and programmable self-assembling DNA structures
- Fully probabilistic design: the way for optimizing of concrete structures