Desenvolvimento de aços alternativos aos materiais temperados e revenidos com limite de resistencia entre 600 e 800 MPa
AUTOR(ES)
Antonio Augusto Gorni
DATA DE PUBLICAÇÃO
2001
RESUMO
This work was developed to characterize the effect of different controlled rolling conditions upon the microstructure and mechanical properties of two high strength low alloy steels, equivalent to the HY-80 alloy, but that do not need to be submitted to a quenching and tempering heat treatment. The first alloy hardens through copper precipitation (HSLA-80), while the second one has extra-Iow carbon content and bainitic microstructure (ULCB). In the first rolling test series total strain applied to the specimens was varied, while in the second one the effect of several finishing temperatures was studied. All HSLA-80 rolled samples were additionally aged. It was verified that the most important controlled rolling parameter was the total strain applied to the specimens, which strongly influenced all mechanical properties, except ductility and yield ratio of the ULCB alloy. The austenitizing temperature only influenced the tensile strength of both steels. For its turn, the finish rolling temperature significantIy influenced their toughness
ASSUNTO(S)
aço de alta resistencia - propriedades mecanicas aço - metalografia laminação (metalurgia) microestrutura
ACESSO AO ARTIGO
http://libdigi.unicamp.br/document/?code=vtls000235745Documentos Relacionados
- Desenvolvimento de procedimentos de soldagem seguros e otimizados para aços temperados e revenido de alta resistência com consumíveis austeníticos
- Comparação do efeito da fragilização por hidrogênio em aços com resistência à tração acima de 1000 MPa
- Efeitos do revenimento realizado a baixa temperatura na resistência ao impacto em aços carbono e ligados temperados
- Avaliação metalúrgica e mecânica de aços cementados e temperados de forma convencional e intensiva
- Caracterização de argamassas de revestimento fabricadas com materiais alternativos