Degradação do PMMA através da reação despolimerização uitlizando catalisadores de óxidos mistos

AUTOR(ES)

Genaro Zenaide Clericuzi

DATA DE PUBLICAÇÃO

2009

RESUMO

In this work, mixed oxides were synthesized by two methods: polymeric precursor and gel-combustion. The oxides, Niquelate of Lanthanum, Cobaltate of Lanthanum and Cuprate of Lanthanum were synthesized by the polymeric precursor method, and treated at 300 C for 2 hours, calcined at 800 C for 6h in air atmosphere. In gel-combustion method were produced and oxides using urea and citric acid as fuel, forming for each fuel the following oxides Ferrate of Lanthanum, Cobaltato of Lanthanum and Ferrato of Cobalt and Lanthanum, which were submitted to the combustion process assisted by microwave power maximum of 10min. The samples were characterized by: thermogravimetric analysis, X-ray diffraction; fisisorção of N2 (BET method) and scanning electron microscopy. The reactions catalytic of depolymerization of poly (methyl methacrylate), were performed in a reactor of silica, with catalytic and heating system equipped with a data acquisition system and the gas chromatograph. For the catalysts synthesized using the polymeric precursor method, the cuprate of lanthanum was best for the depolymerization of the recycled polymer, obtaining 100% conversion in less time 554 (min), and the pure polymer, was the Niquelate of Lanthanum, with 100% conversion in less time 314 (min). By gel-combustion method using urea as fuel which was the best result obtained Ferrate of Lanthanum for the pure polymer with 100% conversion in less time 657 (min), and the recycled polymer was Cobaltate of Lanthanum with 100 % conversion in less time 779 (min). And using citric acid to obtain the best result for the pure polymer, was Ferrate of Lanthanum with 100% conversion in less time 821 (min and) for the recycled polymer, was Ferrate of Lanthanum with 98.28% conversion in less time 635 (min)

ASSUNTO(S)

engenharia de materiais e metalurgica despolimerização e poli (metacrilato de metila) pmma mixing oxides Óxidos mistos depolymerization and pmma

Documentos Relacionados

• Produção de cetonas a partir do etanol sobre óxidos mistos
• Oxidos mistos e microporosos preparados pelo metodo sol-gel como catalisadores para a oxidação de hidrocarbonetos em fase liquida
• Síntese de óxidos mistos SiO2 /Mn xOy para aplicação na reação de redução de O2
• Estudo cinético da reação heterogênea de despolimerização do PET pós-consumo em meio alcalino: influência da velocidade de agitação
• Avaliação de catalisadores na reação de desidratação do glicerol