Correlation between degree of crystallinity, morphology and mechanical properties of PPS/carbon fiber laminates
AUTOR(ES)
Batista, Natassia Lona, Olivier, Philippe, Bernhart, Gérard, Rezende, Mirabel Cerqueira, Botelho, Edson Cocchieri
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
12/02/2016
RESUMO
The crystallization degree in semi-crystalline thermoplastics plays an important role in determining the final properties of structural composite material (e.g. toughness, stiffness and solvent resistance). The main purpose of this work is to study different induced degrees of crystallinity in carbon fiber (CF) reinforced polyphenylene sulfide (PPS) composites, by using three different cooling rates during hot compression molding processing (51%, 58% and 62% of crystallinity). In this study, the morphology, thermal and mechanical properties of the produced laminates were investigated and compared. The results showed an increase in the storage modulus (9.8%), Young's modulus (9.2%) and ILSS (14.2%) for the lower cooling rates. Evidences of fiber/interface improvement and crystallites nucleation on the fiber reinforcement surface were also identified.
Documentos Relacionados
- Fracture morphology of carbon fiber reinforced plastic composite laminates
- Correlation between the Mechanical Properties and Structural Characteristics of Different Fiber Posts Systems
- Mechanical performance of carbon-epoxy laminates. Part II: quasi-static and fatigue tensile properties
- Mechanical performance of carbon-epoxy laminates. Part I: quasi-static and impact bending properties
- Evaluating the mechanical properties of E-Glass fiber/carbon fiber reinforced interpenetrating polymer networks