Características estruturais, microestruturais, dielétricas e piroelétricas de cerâmicas de Sr xBa1-X Nb2O6 forjadas a quente
AUTOR(ES)
Venet, Michel, Vendramini, Aline, Santos, Ivair Aparecido, Eiras, José Antonio, Garcia, Ducinei
FONTE
Materials Research
DATA DE PUBLICAÇÃO
2003-12
RESUMO
The texturing process and the characterization of textured Sr xBa1-xNb2O6 (x = 0.5; x = 0.6) ferroelectric ceramics were investigated. The ceramic bodies were fabricated through two stage sintering. The first and second stage consisted in conventional firing and hot forging of the ceramic bodies, respectively, both at oxygen atmosphere. The forged ceramics achieved high densification level although showing abnormal grain growth. X-ray diffraction, dielectric and pyroelectric analysis showed that is possible to obtain preferential orientation of the [00l] crystallographic planes due to grain arrangement during hot forging. Consequently, the investigated properties for this textured material were strongly dependent on the measurement direction. On the other hand, high room temperature pyroelectric coefficients, of the same order of that obtained for single crystals of same composition, were observed.
Documentos Relacionados
- Structural characterization and ferroelectric properties of strontium barium niobate (Sr xBa1-xNb2O6) thin films
- Transição de Fase Difusa e Propriedades Dielétricas de Cerâmicas Ferroelétricas de (Pb, Ba)Nb2O6
- Propriedades estruturais, microestruturais e supercondutoras de Ca0,5LaBa1,5[(CuO)1-x(MS)x]3O4-Â com M=Zn e Ni
- Structure Refinement of (Sr,Ba)Nb2O6 Ceramic Powder from Neutron and X-Rays Diffraction Data
- Densificação e evolução microestrutural de cerâmicas Pb0,59Ba0,41Nb2O 6