Analysis of Quenching Parameters in AISI 4340 Steel by Using Design of Experiments

AUTOR(ES)

Nunes, Marlon Muniz, Silva, Eduardo Miguel da, Renzetti, Reny Angela, Brito, Tarcisio Gonçalves

FONTE

Mat. Res.

DATA DE PUBLICAÇÃO

14/11/2018

RESUMO

This paper aims to investigate the effects of quenching parameters (temperature and time of austenitizing and cooling rate) on the microstructure, hardness and distortion of AISI 4340 steel by Design of Experiments (DoE). The factorial design was used to determine the influence of the factors on the response variable. After quench samples were characterized by optical and scanning electron microscopy, hardness test and dimensional analysis. Navy C-rings samples are used to determine the distortions after quenching due to development of residual stresses caused by non-uniform cooling. Results show that the cooling rate has a significant effect on the steel after quenching, however, the suitability of all factors is important to achieve the desired properties.

Documentos Relacionados

• Influence of water in the MQL technique in the grinding of steel AISI 4340 using CBN wheels
• Adsorção, absorção, dessorção e difusão de hidrogênio nascente no aço AISI 4340
• Analysis of quartz floatability using design of experiments
• Evaluation of the oil flow using the MQL technique applied in the cylindrical plunge grinding of AISI 4340 steel with cbn grinding wheel
• Numerical stress-life curves for the AISI 4340 steel using two sets of materials properties and different bi-axial stress ratios