Analysis of automotive liftgate seals using finite element analysis

AUTOR(ES)

Ueda, Rafael H. T, Brandão, Lincoln C, Lauro, Carlos H

FONTE

Polímeros

DATA DE PUBLICAÇÃO

19/11/2010

RESUMO

Seals have wide application in automotive products. They are responsible for sealing the car in several parts such as the doors, the air intake cowl seal, and air intake lights seal. Strain and stress studies are very important in order to understand the behavior of polymeric materials, which are generally submitted to great workload variation and environmental influence. This study of EPDM rubber was carried out to define the strain, stress and yield stress. Tensile and compression tests were carried out on workpieces with 100 mm of length. The data were acquired using the Qmat software. A Finite Element Analysis using the MSC Marc MentatTM was conducted and compared with experimental tests. The results showed an increase of effort proportional to bulb thickness. The proportional increase of compression effort for different displacements was significant. Moreover, physical parameters such as length, thickness, and friction coefficient changed the strain and stress rate.

Documentos Relacionados

• Vibration analysis of stiffened plates using finite element method
• Interaction Analysis of Non-aligned Cracks Using Extended Finite Element Method
• Finite Element Analysis of Hepatic Radiofrequency Ablation Probes using Temperature-Dependent Electrical Conductivity
• Finite Element Analysis of Pilot’s Helmet Design Using Composite Materials for Military Aircraft
• Uncertainty quantification of aircraft modal analysis using perturbation technique in the stochastic finite element method