Computational algorithm for the verification of reinforced concrete sections in fire situation

AUTOR(ES)
FONTE

Rev. IBRACON Estrut. Mater.

DATA DE PUBLICAÇÃO

23/09/2019

RESUMO

Resumo As estruturas de concreto armado podem ter sua capacidade resistente reduzida devido à degradação de suas propriedades mecânicas com a temperatura, aumentando o risco de colapsos estruturais. Assim, o dimensionamento de uma estrutura deve considerar seu comportamento em temperatura ambiente e em situação de incêndio (ABNT NBR 14432:2001). Neste trabalho, apresenta-se o desenvolvimento de um algoritmo para verificação da resistência de seções quaisquer de concreto armado à flexão composta oblíqua em temperatura ambiente e em incêndio. Para isso, implementou-se um algoritmo integrador de tensões a partir do perfil de deformações da seção segundo a ABNT NBR 15200:2012, vinculado com um gerador de malhas de elementos finitos e com um algoritmo de análise térmica. Na validação do programa desenvolvido, denominado Pisafo, compararam-se os resultados obtidos com os apresentados na literatura: obtidos em experimentos, com diferenças de até 28,5%, e com programas consagrados, com diferenças de até -14,8%. As maiores variações em relação aos experimentos podem ser atribuídas às diferenças entre as propriedades térmicas do concreto nos experimentos com as prescritas em normas utilizadas no programa e à não consideração do spalling na análise computacional.Abstract Reinforced concrete structures may have reduced strength due to the degradation of their mechanical properties by temperature. This can increase the risk of structural collapses. Thus, the structural design should consider its behavior at room temperature and in fire situation (ABNT NBR 14432:2001). This study presents the development of an algorithm to verify the strength of any reinforced concrete sections subjected to unsymmetrical bending at room temperature and in fire situation. For this purpose, a stress integration algorithm was implemented from the strain profile of the section according to ABNT NBR 15200:2012, linked to a finite element mesh generator and a thermal analysis algorithm. For validation of the developed program, called Pisafo, the results obtained were compared with those in the technical literature: obtained in experiments (with differences of up to 28.5%) and with recognized software solutions (with differences of up to -14.8%). The largest variations in relation to the experiments can be attributed to the differences between the thermal properties of the concrete in the experiments with those prescribed in the technical standards used by the program and the non-consideration of spalling in the computational analysis.

Documentos Relacionados