Annular Flows
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. The effect of the inner cylinder rotation on the fluid dynamics of non-Newtonian fluids in concentric and eccentric annuli
Helical flow in an annular space occurs during oil drilling operations. The correct prediction of flow of drilling fluid in an annular space between the wellbore wall and the drill pipe is essential to determine the variation in fluid pressure within the wellbore. This paper presents experimental and CFD simulation results of the pressure drop in the flow of
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
2. Influência da geometria da nanocarga na estruturação, orientação e propriedades de filmes tubulares de nanocompósitos de PA6 / Influence of the nanoparticles shape on the structure, orientation and properties of pa6 nanocomposites blown films
The structure and morphology of polymers and consequently their properties are dependent on the processing conditions. During the blown film process, high shear and elongational flows can induce a preferred orientation of the polymer chains; controlling the process conditions, it is possible to obtain films with anisotropic properties. Polymeric nanocomposit
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/06/2012
-
3. Modelagem matemática e simulação de escoamentos em canais anulares com interação fluido-estrutura / Mathematical modeling and simulation of flow in annular channels with fluid-structure interaction
O objetivo deste trabalho é de dar continuidade ao desenvolvimento de uma plataforma numérica em canais anulares, problemas presentes em engenharia de perfuração e da indústria de gás e petróleo. A plataforma numérica, desenvolvida utilizando o método de discretização dos volumes finitos, emprega métodos e esquemas de segunda ordem. A utilizaçã
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/03/2011
-
4. Project, development and testing In vitro of new model pump for cardiopulmonary bypass : spiral pump / Projeto, desenvolvimento e ensaios "In Vitro" de novo modelo de bomba de sangue para circulação extracorpórea : bomba espiral
A model of blood pump has been developed, the Spiral Pump. This pump has an internal rotor, a conically shaped fuse, containing threads with double entrance on its surface. This rotor is supported by two bearings assembled at a stainless steel shaft, fixed to the housing´s base. The rotation of the conical fuse is generated by magnetic coupling to a motor,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/02/2010
-
5. Forced convection to laminar flow of liquid egg yolk in circular and annular ducts
The steady-state heat transfer in laminar flow of liquid egg yolk - an important pseudoplastic fluid food - in circular and concentric annular ducts was experimentally investigated. The average convection heat transfer coefficients, determined by measuring temperatures before and after heating sections with constant temperatures at the tube wall, were used t
Brazilian Journal of Chemical Engineering. Publicado em: 2009-06
-
6. EXPERIMENTAL STUDY OF AXIAL FLOW THROUGH AND ANNULAR REGION WITH INNER CYLINDER ROTATION / ESTUDO EXPERIMENTAL DO ESCOAMENTO AXIAL ATRAVÉS DE REGIÃO ANULAR COM ROTAÇÃO DO CILINDRO INTERNO
The flow between concentric cylinders with an inner rotating cylinder with an imposed pressure-driven axial flow was studied experimentally. The radius ratio was (n) = 0, 64 and the aspect ration was (r) = 265. Friction factor and velocity fields were studied for four rotations of the inner cylinder and for laminar, transitional, and turbulent flow. Velocity
Publicado em: 2007
-
7. Carbon dioxide evaporation in a single microchannel
Despite its importance for designing evaporators and condensers, a review of the literature shows that heat transfer data during phase change of carbon dioxide is very limited, mainly for microchannel flows. In order to give a contribution on this subject, an experimental study of CO2 evaporation inside a 0.8 mm-hydraulic diameter microchannel was performed
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2006-03
-
8. Desenvolvimento de um simulador de bombeio por cavidades progressivas
The method of artificial lift of progressing cavity pump is very efficient in the production of oils with high viscosity and oils that carry a great amount of sand. This characteristic converted this lift method into the second most useful one in oil fields production. As it grows the number of its applications it also increases the necessity to dominate its
Publicado em: 2005
-
9. CONVECÇÃO FORÇADA EM ESCOAMENTOS LAMINARES DE LÍQUIDOS VISCOPLÁSTICOS EM TUBOS E ESPAÇOS ANULARES / FORCED CONVECTION IN LAMINAR FLOWS OF VISCOPLASTIC LIQUIDS THROUGH TUBES AND ANNULI
Non-Newtonian fluids flow are very common in industrial processes, so it is important to know both the effect of the process on the fluid and vice-versa. Non-Newtonian Fluids exhibit complex mechanical behavior not found in Newtonian fluids, such as shear-rate-dependent viscosity and non-zero Yield stress. Nowadays there is a lack of understanding in the lit
Publicado em: 2004
-
10. The three-dimensional numerical aerodynamics of a movable block burner
Computational fluid-dynamics techniques were employed to study the aerodynamics of a movable block swirl burner, developed by the International Flame Research Foundation, IFRF, which is characterized by the ability to adjust continuously and dynamically the intensity of the swirl by means of the simultaneous rotation of eight movable blocks, inserted between
Brazilian Journal of Chemical Engineering. Publicado em: 2003-10
-
11. Pressure Drop in Vertical Core-Annular Flow
An experimental apparatus for the study of core annular flows of heavy oil and water at room temperature has been set up and tested at laboratory scale. The test section consists of a 2.75 cm ID galvanized steel pipe. Tap water and a heavy oil (17.6 Pa.s; 963 kg/m³) were used. Pressure drop in a vertical upward test section was accurately measured for oil f
Journal of the Brazilian Society of Mechanical Sciences. Publicado em: 2001
-
12. Metodo dos volumes finitos aplicado a modelagem matematica e simulação computacional de um forno aquecido por jato de chama com escoamento em vortice
This thesis had the purpose of reaching a complementary k.nowledge of the intricate inter-relations between the complex phenomena of mass, momentum and energy transfers, which develop in furnaces with vortex flows, by mathematical modelling and computational simulation, in two and three-dimensional approaches. Furthermore, the effects of the bumer design and
Publicado em: 2000