Aluminum And Simulation
Mostrando 1-12 de 40 artigos, teses e dissertações.
-
1. Design and Simulation of Broadband Horn Nanoantennas for Nanophotonic Applications
Abstract Optical plasmonic nanoantennas have proven useful in nanoplasmonic applications, paving the way for more efficient wireless optical communications. In this work, we propose a parametric study of a plasmonic horn nanoantenna in flat H sectorial format and beveled horn, both designed to radiate in the three wavelengths of optical communications: [850
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. High-Frequency Induction Heating of Al-Si-Cu-Mg aluminum alloy in Thixoforming
Thixoforming is the process of shaping near net shape metal components in a semisolid state. The process consists of preparing feedstock, reheating and shaping. Reheating the billet is the most critical step in thixoforming. Induction heating requires precise temperature control to obtain globular microstructure and prevent process defects, such as insuffici
Mat. Res.. Publicado em: 28/10/2019
-
3. Effect of surface roughness and lubrication on the friction coefficient in deep drawing processes of aluminum alloy aa1100 with fem analysis
ABSTRACT Friction between the interface workpiece and tooling has considerable importance in sheet metal forming operations; an accurate description of the friction is necessary to analyze and design new workpieces and tooling. This work suggests a methodology to determine and evaluate the mean coefficient of friction (COF) using the Finite Element Method (F
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Influencia de la geometría del proyectil en ensayos dinámicos de tracción
ABSTRACT The focus of this study is to discuss the influence of the projectile’s length on the results of an experiment of the Hopkinson Traction Bar (SHTB). Simulations have been made by means of finite elements using the commercial software ABAQUS in tests of traction at high speeds of deformation in samples of aluminum alloy 7017T73 varying the length o
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Effect of surface roughness and lubrication on the friction coefficient in deep drawing processes of aluminum alloy aa1100 with fem analysis 1
ABSTRACT Friction between the interface workpiece and tooling has considerable importance in sheet metal forming operations; an accurate description of the friction is necessary to analyze and design new workpieces and tooling. This work suggests a methodology to determine and evaluate the mean coefficient of friction (COF) using the Finite Element Method (F
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. Numerical and experimental investigation of forming limit diagrams of 6063 aluminum alloy sheets using Ayada ductile fracture criterion and the second derivative of large strain criterion at increased temperatures
Abstract The present study investigated the forming limit diagrams (FLDs) of aluminum alloy 6063 sheets using numerical and experimental methods at increased temperatures. In the numerical section, for the first time, the Ayada ductile fracture criterion and the second derivative of the large strain criterion were used. ABAQUS finite element (FE) analysis so
Lat. Am. j. solids struct.. Publicado em: 17/09/2018
-
7. Determination of Forming Limit Diagrams Based on Ductile Damage Models and Necking Criteria
Abstract In this paper, forming limit diagrams (FLDs) for an aluminum alloy are predicted through numerical simulations using various localized necking criteria. A comparative study is conducted for the FLDs determined by using the Lemaitre damage approach and those obtained with the modified Gurson-Tvergaard-Needleman (GTN) damage model. To this end, both d
Lat. Am. j. solids struct.. Publicado em: 2017-10
-
8. Experimental and Numerical Investigation of the Dynamic Behavior of Clamped Thin Panel Subjected to Underwater Impulsive Loading
Abstract The dynamic response and failure mechanism of clamped thin aluminum alloy plates subjected to underwater impulsive loading are investigated by laboratory experiments and finite element (FE) simulations. The effects of plate thickness, impulsive loading and fluid-structure interaction on failure modes in clamped thin aluminum plates are comprehensive
Lat. Am. j. solids struct.. Publicado em: 2017-06
-
9. Investigation of High-Speed Cryogenic Machining Based on Finite Element Approach
Abstract The simulation of cryogenic machining process because of using a three-dimensional model and high process duration time in the finite element method, have been studied rarely. In this study, to overcome this limitation, a 2.5D finite element model using the commercial finite element software ABAQUS has been developed for the cryogenic machining proc
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
10. BASIC UNIT COST SIMULATION FROM FREE-STALL DESIGN TO DAIRY CATTLE CONFINEMENT USING DIFFERENT CONSTRUCTION TECHNIQUES
ABSTRACT The ascendancy of milk production in Brazil is due to mainly to the adoption of confinement systems, however, construction quality of these systems impact on milk production. This study aimed to simulate the Basic Unit Cost (BUC m-2), referring to a free-stall design with capacity for 80 animals and different construction techniques, with a database
Eng. Agríc.. Publicado em: 2016-12
-
11. Finite Element Analysis of Structures with Extruded Aluminum Profiles Having Complex Cross Sections
Abstract Extruded aluminum profiles are widely used in building and automation structures due to their durability, lightweight, corrosion resistance, shorter fastening time and reusability. Proper design is crucial in maintaining the lifespan of these structures. It is therefore essential to determine the structural behaviors of the structures such as the na
Lat. Am. j. solids struct.. Publicado em: 2016-08
-
12. Application of Computational fluid dynamic in aluminum refining through pneumatic injection of powders
Magnesium removal process from molten aluminum using particles of silica sand was studied from a hydrodynamic point of view using computational fluid dynamics (CFD). The gas-liquid flow was modeled by a model of the Euler type for both gas and liquid phase transport. Newton´s law of motion was used to describe the subsurface motion of injected solid particl
Mat. Res.. Publicado em: 2014-12