Aluminium Complex
Mostrando 1-12 de 19 artigos, teses e dissertações.
-
1. Impact Response of Aluminium Alloy Foams Under Complex Stress States
Abstract A series of dynamic tests were conducted on a closed-cell aluminum alloy foams in order to determine experimental failure surface under impact loading conditions. Quasi-static tests have also been performed to investigate failure mechanism under different stress paths. Three typical types of deformation modes can be observed, which corresponds to th
Lat. Am. j. solids struct.. Publicado em: 2016-04
-
2. Spectrophotometric Determination of Aluminium in Hemodialysis Water
A spectrophotometric method for the determination of AlIII in hemodialysis water employing alizarin red S complexing agent in the presence of polyvinylpyrrolidone 40 surfactant is described. The complex, formed in pH 4.5 buffered media, is detected at 510 nm. Optimal concentrations of all reagents were investigated as well as the appropriate detection wavele
J. Braz. Chem. Soc.. Publicado em: 2015-11
-
3. Multi objective optimization of foam-filled circular tubes for quasi-static and dynamic responses
AbstractFuel consumption and safety are currently key aspects in automobile design. The foam-filled thin-walled aluminium tube represents a potentially effective material for use in the automotive industry, due to its energy absorption capability and light weight. Multi-objective crashworthiness design optimization for foam-filled double cylindrical tubes is
Lat. Am. j. solids struct.. Publicado em: 2015-06
-
4. STUDY OF BINARY COMPLEXES OF ALUMINUM(III) WITH SULFUR AMINO ACIDS AND PHOSPHATE LIGANDS / ESTUDO DE COMPLEXOS BINÁRIOS DE ALUMÍNIO(III) COM AMINOÁCIDOS SULFURADOS E LIGANTES FOSFATADOS
The study of binary complexes of Al(III) with sulfur amino acids (methionine, cysteine, homocysteine and penicillamine) and phosphate ligands (adenosine 5 - triphosphate and phosphocreatine) was done in aqueous solution applying potentiometric titrations, (13)C and (27)Al NMR, Raman spectroscopy, molecular modeling and DFT: B3LYP/6-311G theoretical calculati
Publicado em: 2010
-
5. Ferritin gene expression and antioxidant response of two Coffea arabica cultivars exposed to iron and aluminium / Expressão de genes da ferritina e resposta antioxidante em duas cultivares de Coffea arabica expostas a ferro e aluminio
Ferritin is a protein capable to store iron (Fe) atoms in a nontoxic form, controlling the level of this metal in the cells. In humans, ferritin is able to accommodate aluminium (Al) atoms, avoiding its toxicity. Considering that Coffea arabica plants are able to grow well in acidic soils with high Al and suspension cells treated with this same metal showed
Publicado em: 2009
-
6. SÍNTESE E CARACTERIZAÇÃO DO COMPLEXO DE ALUMÍNIO COM O AURINTRICARBOXILATO DE AMÔNIO (ATA) COMO LIGANTE. / SYNTHESIS AND CHARACTERIZATION OF ALUMINUM COMPLEX WITH AURINTRICARBOXILATO AMMONIUM (ATA) AS A BINDER
O complexo [Al(H2ATA)]SO4.H2O foi sintetizado e caracterizado com objetivo de entender a coordenação do ligante aurintricarboxilato ao metal alumínio, uma vez que este metal é considerado para comunidade científica como neurotóxico. O composto apresenta fórmula molecular [Al(H2ATA)]SO4.H2O. O complexo foi caracterizado por analise elementar, técnicas
Publicado em: 2009
-
7. Estudo do comportamento de corrosão dos intermetálicos presentes na liga AA 2024-T3, por meio de técnicas de microscopia associada a técnicas eletroquímicas / INVESTIGATION ON THE CORROSION BEHAVIOUR OF THE INTERMETALLICS IN THE AA 2024-T3 ALLOY BY MICROSCOPY ASSOCIATED TO ELECTROCHEMICAL TECHNIQUES.
The AA2024-T3 aluminium alloy is largely used in the aerospace industry. It has high mechanical properties due to the presence of alloying elements, mainly copper, that form finely distributed precipitates coherent with the matrix, during controlled aging treatment. However, during this process, large intermetallics (IMs) are also formed with composition and
Publicado em: 2008
-
8. TRATAMENTO DE REVESTIMENTOS GASTOS DE CUBA ELETROLÍTICA DA INDÚSTRIA DE ALUMÍNIO / TREATMENT OF SPENT POTLINER FROM ALUMINIUM INDUSTRY
Spent Potliner (SPL) is a residue from the primary aluminium production. It is indicated as the major environmental problem in the aluminum industry. SPL is formed by two fractions: Carbonaceous and refractory. According to Brazilian Standards NBR 10004, the SPL is listed as hazardous waste (K088) because it contains high levels of cyanides (complex). The pr
Publicado em: 2007
-
9. Oxidation - Nitridation of Ni-Cr-Al alloys
A series of alloys containing 24-36 wt pct Cr and 13.5 - 25.0 wt pct Al was reacted with air at 1100°C for 260 h. The products of isothermal reaction were scales of a-Al2O3 plus small amounts of Cr2O3. These grew according to parabolic kinetics, interrupted by episodic weight losses caused by partial spallation. No nitridation occurred during the isothermal
Materials Research. Publicado em: 2004-03
-
10. Identificação modal de uma estrutura aeronáutica via algoritmo de realização de sistemas / Modal identification of an aeronautical structure via the eigensystem realization algorithm
The determination of the dynamic characteristics of aircraft structures has become an extremely important issue in the aerospace industry, primarily due to the continuous demand for lighter and consequently more flexible structures. In this context, most aerospace structural system must be subjected to some form of modal verification prior to flight in order
Publicado em: 2002
-
11. Forjamento da liga AA 2011 no estado semi-solido : estudo do processo e do produto
The work deals with the ana1ysis of the semi-solid technology applied to the thixoforming of AA 20011 aluminium alloy. Initially it was studied the influence of temperature in the quality of semi-solid raw material suitable for thixoforming (spheroidal morphology in the solid phase) when producing such material by partial melting of super-refined as-cast str
Publicado em: 2001
-
12. Uso do violeta de alizarina N (AVN) como reagente espectrofotométrico na determinação de alumínio
The present work proposes the application of the 4-Hidroxy-3-(2-hydroxynaphtylazo)-benzenesulphonic acid (C.I. 15670), Alizarine Violet N (AVN), as a reagent for direct aluminium determination using molecular absorption spectrophotometry in the presence of tensoatives. Al(III) cation reacts with AVN in pH 9.4, forming a red complex, stable for at least 24 ho
Química Nova. Publicado em: 2000-04