Aluminium Can
Mostrando 1-12 de 72 artigos, teses e dissertações.
-
1. Shelf-life assessment of energy banana bar using acceleration method with critical moisture content approach
Abstract The shelf-life of the product need to be evaluated according to the commercialization of the product. Shelf-life assessment of the product can be done using acceleration method (Accelerated Shelf-life Testing) with critical moisture content approach. This research used the acceleration method to predict the expired date of the energy bar based banan
Food Sci. Technol. Publicado em: 2021-06
-
2. The effects of two abundant ant species on soil nutrients and seedling recruitment in Brazilian Atlantic Forest
ABSTRACT Ants can influence soil fertility and the spatial distribution of seeds, with possible effects on seedling recruitment. The ant species Pachycondyla striata Fr. Smith, 1858 and Odontomachus chelifer (Latreille, 1802) co-occur in many forest areas in the Neotropics. We assessed soil fertility and seed bank structure in soil samples close and distant
Rev. Bras. entomol.. Publicado em: 13/01/2020
-
3. Effect of Extrusion and Heat Treatment on Microstructure and Mechanical Properties of Hypereutectic A390-0.3wt%Nd Alloy
An hypereutectic aluminium alloy with a composition of 16-18wt%Si, 4-5wt%Cu, 0.45-0.65wt%Mg, 0.3wt%Nd and Al balance (A390-0.3wt%Nd alloy) was processed by extrusion and aging at 200ºC for 10 hours. The effect of the thermomechanical processing and heat treatment on microstructure and mechanical properties was investigated for A390-0.3wt%Nd alloy. It was sh
Mat. Res.. Publicado em: 10/06/2019
-
4. Cooking ways on composition of intramuscular phospholipid fatty acids of inra rabbit
RESUMO: Avaliou-se o efeito do cozimento da fervura, emprego de microondas e de preparo da carne envolvida em alumínio (Al) de três formas de cocção na composição de ácidos graxos fosfolipídicos intramusculares de coelho Inra. Os resultados mostraram que, a proporção de ácidos graxos poliinsaturados (AGPI) (por exemplo, C18: 2n-6, C20: 4n-6, C20:
Cienc. Rural. Publicado em: 13/05/2019
-
5. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
6. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
7. Influence of Si Coating on Interfacial Microstructure of Laser Joining of Titanium and Aluminium Alloys
A common phenomenon in the dissimilar joints is the presence of brittle compounds in the joining interface region. The brittle phases can decrease by introduction of interlayers in the joining interface, such as silicon, that inhibits the formation of Al3Ti and AlTi3 phases in joining process between titanium and aluminium alloys. In the present work, the jo
Mat. Res.. Publicado em: 09/11/2017
-
8. Effect of Preheating on Microstructure and Tensile Properties of Friction Stir Welded AA7075 Aluminium Alloy Joints
ABSTRACT The high strength AA7075 aluminum alloy is commonly used in the aerospace components due to its exclusive mechanical properties like lightweight and high strength. This alloy cannot be welded by fusion welding techniques due to solidification cracking which severely degrade the mechanical properties of the joint. In contrast, through friction stir w
Braz. arch. biol. technol.. Publicado em: 23/01/2017
-
9. Effect of Humidity on The Fatigue Behaviour of Adhesively Bonded Aluminium Joints
Abstract The present work focuses on the effects of water degradation on the fatigue behaviour of adhesive joints bonded with aluminium adherends. The objective of this study is to measure the influence that humidity has on the fatigue crack growth velocity of two distinct adhesives characterized using the Paris Law, using double cantilever beam (DCB) specim
Lat. Am. j. solids struct.. Publicado em: 2017-01
-
10. Effect of Mill Type on Morphology of AA6013 Aluminium Powder
ABSTRACT In conventional recycling method, metal chips are cast after pressing and melting in electric arc furnace. Material loss occurs during the recycling from liquid metal due to the several reasons. Direct recycling method which produces the aluminium powder from aluminium chips using mechanical mill can be an alternative to conventional recycling metho
Matéria (Rio J.). Publicado em: 2016-09
-
11. Impact Response of Aluminium Alloy Foams Under Complex Stress States
Abstract A series of dynamic tests were conducted on a closed-cell aluminum alloy foams in order to determine experimental failure surface under impact loading conditions. Quasi-static tests have also been performed to investigate failure mechanism under different stress paths. Three typical types of deformation modes can be observed, which corresponds to th
Lat. Am. j. solids struct.. Publicado em: 2016-04
-
12. Multi objective optimization of foam-filled circular tubes for quasi-static and dynamic responses
AbstractFuel consumption and safety are currently key aspects in automobile design. The foam-filled thin-walled aluminium tube represents a potentially effective material for use in the automotive industry, due to its energy absorption capability and light weight. Multi-objective crashworthiness design optimization for foam-filled double cylindrical tubes is
Lat. Am. j. solids struct.. Publicado em: 2015-06