Alloys Of The System Al Si Cu
Mostrando 1-4 de 4 artigos, teses e dissertações.
-
1. Morphology and Phase Formation During the Solidification of Al-Cu-Si and Al-Ag-Cu Ternary Eutectic Systems
The microstructure of ternary alloys in the Al rich corner of the Al-Cu-Si and Al-Ag-Cu systems were analyzed in order to determine the solidification path in the different structural regions expected from the equilibrium phase diagram. The analysis was based on theoretical models developed in the literature for solidification of ternary eutectic system allo
Mat. Res.. Publicado em: 26/02/2018
-
2. Decomposição spinodal de ligas do sistema Al-Si-Cu
A decomposição spinodal de ligas de alumínio do sistema Al-Si-Cu foi estudada a partir de diferentes condições termodinâmicas. Duas composições foram selecionadas: A1-1,5%Si- 1,0%Cu e A1-2,5%Si-1,0%Cu, com as composições em peso. Estas ligas foram elaboradas por fusão convecional num forno a gás (GLP) a partir de alumínio, cobre e silício, na c
Publicado em: 2009
-
3. Study of alloys and magnets prepared by the hydrogenation, disproportionation, desorption and recombination process (HDDR) based on the Pr-Fe-B system with dopants and alloying additions / Estudo de ligas e ímãs preparados pelo processo hidrogenação, desproporção, dessorção e recombinação (HDDR) à base de Pr-Fe-B com adição de dopantes elementos de liga
A adição de elementos dopantes e elementos de liga aos magnetos permanentes policristalinos à base de terras raras tem como objetivo a melhora das propriedades magnéticas. Neste trabalho estudou-se a adição de 0,1% at. dos elementos: Ti, V, Cr, Ni, Zr, Nb ou Mo na composição Pr14FebalCo16B6 ; as adições de 0,1 % at., 0,3 % at. e 0,5 % at. dos eleme
Publicado em: 2008
-
4. Estudo da corrosão intergranular em ligas de alumínio de fundição influências do teor de cobre e do tratamento de solubilização
It is well known that the element copper, even with an impurity level less than 0,3% modifies substancially the susceptibility to intergranular corrosion in alloys of commercial denomination 356 (nominal composition Al7Si0,3Mg). This paper aims to evaluate the influence of variations in the content of the element copper and the effect of thermal treatment of
Publicado em: 2006