Aisi H13
Mostrando 13-24 de 34 artigos, teses e dissertações.
-
13. SÍNTESE DE (TIO)SEMICARBAZONAS E AVALIAÇÃO EXPERIMENTAL E TEÓRICA DA ATIVIDADE ANTI-CORROSÃO / SYNTHESIS OF (thiosemicarbazones AND EVALUATION AND EXPERIMENTAL THEORY OF ACTIVITY ANTI-CORROSION
Nesta Dissertação foram sintetizados 30 compostos, sendo 15 pertencentes à classe das semicarbazonas e os outros 15 pertencentes à classe das tiossemicarbazonas, com o objetivo de avaliar a eficiência dos mesmos como inibidores de corrosão. Os compostos foram previamente analisados por Modelagem Molecular, obtendo-se informações a respeito de proprie
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/10/2010
-
14. Experimental and theoretical study on workpiece temperature when tapping hardened AISI H13 using different cooling systems
Tapping operations on hardened steels have always been a great challenge. Dry machining and two cooling systems were used when tapping hardened AISI H13 (53 HRC). Embedded thermocouples were used for temperature measurement close to the thread diameter in the radial and axial direction. A FEA model was used to evaluate the heat "Q", and coefficient of convec
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-06
-
15. Wear evaluation of WC inserts coated with TiN/TiAlN multinanolayers
TiN/TiAlN multilayers were deposited by radio frequency, r.f., reactive magnetron sputtering by using titanium and aluminum targets with 10 cm diameter and 99.99% purity in an argon/nitrogen atmosphere, applying a substrate temperature of 300 ºC. WC inserts were used as substrates to improve the mechanical and tribological properties of TiN/TiAlN multilayer
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-06
-
16. Influência da boretação com pó na resistência ao desgaste, corrosão e oxidação dos aços AISI 1060 e AISI H13 / Influence of pack boriding on the wear, corrosion and oxidation resistance of AISI 1060 and AISI H13 steels
Neste trabalho estudou-se o efeito do tratamento de boretação na resistência ao desgaste, corrosão e oxidação dos aços AISI 1060 e AISI H13. As amostras dos aços foram boretadas com pó a 900 e 1000°C por 2 e 4 horas. Foram realizados ensaios de microdesgaste em máquina do tipo esfera fixa, sem uso de abrasivos, nas amostras boretadas e não boreta
Publicado em: 2010
-
17. Transição no regime de desgaste por deslizamento dos aços: uma abordagem termodinâmica. / Sliding wear regime transition of steels: a thermodynamic approach.
Este trabalho apresenta uma análise do fenômeno da transição no regime de desgaste por deslizamento dos aços. Esta análise foi feita usando as abordagens termodinâmicas do desgaste e estudando tópicos como a temperatura superficial, o papel da remoção das partículas de desgaste e a evolução nas propriedades das superfícies desgastadas ao longo
Publicado em: 2010
-
18. A comparative study of mechanical and tribological properties of AISI-304 and AISI-316 submitted to glow discharge nitriding
Mechanical and tribological properties os AISI 304 and AISI 316 stainless steels submited to glow discharge ion nitriding are reported.The atmosphere was 20:80 - N2:H2 with substrate temperatures ranging from 300 to 500 °C. Treatment at 300 °C produced expanded austenite (γN) in both steels. Increasing the temperature, the phases γ´-Fe4N and - Fe2+xN we
Materials Research. Publicado em: 2009-06
-
19. Desgaste de aços AISI H13 recobertos com filmes finos ternários Ti1-xAIxN com diferentes estruturas cristalinas
A maior parte das falhas de ferramentas origina-se no fenômeno desgaste, cujo controle ocorre principalmente por avaliações das taxas de desgaste. A maioria dos ensaios experimentais utiliza a variação de massa por tempo para avaliar a taxa de desgaste, considerando a densidade do material. A partir da densidade do material, estima-se o volume desgastad
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/06/2008
-
20. High temperature oxidation behavior of the AISI 430A and AISI 430E stainless steels in Ar/H2/H2O atmosphere
The high temperature oxidation behavior of two ferritic stainless steels type AISI 430A and AISI 430E is examined at low oxygen pressure and high temperatures. The AISI 430A steel is ferritic up to 860 °C. Above this temperature, this steel is bi-phased: presence of austenite and ferrite phases. The 430E steel is stabilized with Nb, and is ferritic at all t
Materials Research. Publicado em: 2008-06
-
21. Estudo da obtenção e das propriedades dos filmes de TiN e TiC depositados sobre aços ferramentas AISI H13 e D2 nitretados e não nitretados. / Study of the making and properties TiC and TiN coatings deposited on AISI H13 and AISI D2 toll nitrated and not nitrated steel.
Filmes de nitreto de titânio e carbeto de titânio foram obtidos por deposição reativa via magnetron sputtering, utilizando como gases reativos, nitrogênio e metano, respectivamente. Foram depositados filmes de TiN e TiC, primeiramente sobre substratos de aços ferramenta AISI H13 e AISI D2 temperados e revenidos. Posteriormente, realizou-se o tratamento
Publicado em: 2008
-
22. Avaliação de desempenho de navalhas de corte / Assessment of cutting blade performance
Este trabalho tem como base o estudo do processo de fabricação por forjamento a quente dos grampos ferroviários “Deenik”, que se inicia com o corte de pré-formas. Após análise preliminar da situação, concluiu-se que era necessário realizar estudos teórico-práticos para melhorar o desempenho das navalhas empregadas, melhorando a durabilidade, a
Publicado em: 2008
-
23. Propriedades superficiais do aço AISI H13 após tratamento duplex (nitretação e (TiAIN) para moldes de injeção de alumínio
The hot-work steel AISI H13 is the most used to make molds in aluminum injection. Many studies have been made to increase its lifetime. One promising method is the duplex treatment, where the mold is submitted to a heat treatment, nitriding and coating deposition. The current work uses the titanium aluminum nitride (TiAlN). The influence of the nitrated laye
Publicado em: 2007
-
24. Efeito do carbono no processo de nitrocarburização com plasma pulsado da liga metalica AISI H13 / Carbon effect on pulsed plasma nitrocarburizing process in AISI H13 tool steel
This work presents a study on the effect of the incorporation of carbon and nitrogen on he formation of a singlephase homogeneous layer, composed by e -Fe2-3(C,N) carbonitrides, on the top surface of a AISI H13 tool steel. We also present studies on the effect of the incorporation of these elements (C and N) in the microstructure and in the mechanical and ch
Publicado em: 2007