Aisi 304l Steel
Mostrando 1-12 de 29 artigos, teses e dissertações.
-
1. Experimental Thermal Analysis in Rotary Friction Welding of Dissimilar Materials
ABSTRACT: Rotary friction welding process (RFW) is one of the most used processes in the world for manufacturing bimetallic components that require high mechanical strength. All process occurs in solid state at temperatures below the melting point of the involved materials, having as the main bonding mechanisms the diffusion and mechanical mixture. The purpo
J. Aerosp. Technol. Manag.. Publicado em: 23/09/2019
-
2. Estimación de propiedades mecánicas de chapa de acero inoxidable 304L mediante ensayos SPT
ABSTRACT The mechanical characterization of materials by small specimen testing has growing interest in Structural Engineering. Small Punch Test (SPT) is applied to estimate mechanical properties of samples that can be extracted from components or structures without affecting service operation. In this paper the development of the test device is reported, co
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Estimación de propiedades mecánicas de materiales metálicos por el método inverso en SPT
ABSTRACT Mechanical characterization of metallic materials by Small Punch Test (SPT) allows to evaluate uniaxial tensile properties [1]. In this work, by means of an inverse procedure and numerical simulation of SPT tests we estimate uniaxial tensile properties of AISI 304L stainless steel. We detail the applied procedure to estimate the yield stress where t
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Effects of Aging at 450°C on the Pitting Corrosion Resistance and Toughness of AISI 317L Steel Welded by GTAW and FSW
Austenitic stainless steels are high corrosion resistant alloys widely used in many industrial fields. Among this family of steels, AISI 317L stands out due to its higher localized corrosion resistance when compared to the traditional grades AISI 304L and AISI 316L. In some applications in oil refineries, the AISI 317L is being specified for services at mode
Mat. Res.. Publicado em: 17/11/2017
-
5. Use of Electrochemical Tests for Assessment of the Effect of Erosive Particle Size on the Erosion-Corrosion Behaviour of AISI 304L Austenitic Stainless Steel
The degradation of AISI 304L stainless steel under static corrosion, liquid impingement and corrosion-erosion was studied using polarization curves. Static corrosion and liquid impingement tests were performed in 3.5% NaCl solution. Corrosion-erosion tests were performed in the same solution, containing 10 wt-% of three different SiO2 particle sizes. Synergi
Mat. Res.. Publicado em: 04/03/2016
-
6. Effect of Continuous and Pulsed Current on the Metallurgical and Mechanical Properties of Gas Tungsten Arc Welded AISI 4340 Aeronautical and AISI 304 L Austenitic Stainless Steel Dissimilar Joints
In this research work, the weldability of low alloyed AISI 4340 aeronautical steel and AISI 304L austenitic stainless steel joined by continuous current (CC) and pulsed current (PC) gas tungsten arc welding (GTAW) techniques, using ER309L and ERNiCr-3 filler metals was investigated. The main focus of the study involves the investigation on the effect of cont
Mat. Res.. Publicado em: 2015-02
-
7. Designing of CK45 carbon steel and AISI 304 stainless steel dissimilar welds
Gas tungsten arc welding of CK45 and AISI304 stainless steel was performed through preparation of different types of samples using ER308L and ERNi-1 wires. Welded samples were studied by different techniques including optical metallography, scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM-EDS), X-ray diffraction, hardness
Mat. Res.. Publicado em: 11/10/2013
-
8. Effects of the rolling temperature on the formation and on the reversion of strain induced martensite in a AISI 304L stainless steel. / Efeitos da temperatura de laminação na formação e na reversão de martensita induzida por deformação no aço inoxidável austenítico AISI 304L.
Objetivo principal desta dissertação foi verificar os efeitos da temperatura de laminação na formação de martensita induzida por deformação e na sua posterior reversão da martensita para austenita no aço inoxidável austenítico AISI 304L. O estudo foi predominantemente microestrutural e para análise e caracterização foram utilizadas as técnica
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/02/2012
-
9. Estudo do eletropolimento galvanostático de aço inoxidável AISI 304 utilizando soluções ácidas concentradas / Galvanostatic electropolishing of Aisi 304 stainless steel using concentrated acid solutions
O aço inoxidável tem sido objeto de inúmeros estudos devido à importância tecnológica e econômica. Características como durabilidade, resistência à corrosão e às temperaturas elevadas conferem ao aço importantes aplicações em diversos setores industriais. Dessa forma, o estudo de metodologias de polimento químico e eletroquímico, ao invés d
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/12/2011
-
10. AvaliaÃÃo e ComparaÃÃo da ResistÃncia à CorrosÃo por Pites do AÃo SuperaustenÃtico AL 6XN PLUS TM e dos AÃos InoxidÃveis AustenÃticos da SÃrie AISI 304L, 316L e 317L / Evaluation and comparison of resistance to pitting corrosion of the steel superaustenitic AL 6XN PLUS â and the series austenitic stainless steels AISI 304L, 316L and 317L.
As torres de destilaÃÃo de petrÃleo sofrem corriqueiramente com problemas relacionados à corrosÃo devido ao elevado Ãndice de acidez presente no petrÃleo exigindo uma elevada resistÃncia à corrosÃo por parte dos equipamentos utilizados. Dentre os materiais empregados na fabricaÃÃo e revestimento dos equipamentos, destacam-se os aÃos inoxidÃveis
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/11/2011
-
11. Parâmetros de conformação para a estampagem incremental de chapas de aço inoxidável AISI 304L
O presente trabalho tem como objetivo conhecer o comportamento do aço inoxidável austenítico AISI 304L para o processo de Estampagem Incremental de Chapas (ISF - Incremental Sheet Forming), baseado nos parâmetros: raio da ferramenta RT, ângulo de parede a e passo vertical dz. Os experimentos baseiam-se na variante da Estampagem Incremental denominada Es
Publicado em: 2011
-
12. Caracterização eletroquímica e microestrutural de espinélios mistos nanocristalinos produzidos eletroquimicamente sobre o aço AISI 304
In the coloration process of stainless steels, an oxide film, which exhibits interference colors, is formed on the metal surface. In this work, nanoporous oxide films were formed on AISI 304L stainless steel by electrochemical coloring in 5 M H2SO4 and 2.5 M CrO3 with different electrolysis times, using the triangular current scan method. The nanocrystalline
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011