Agglomerated
Mostrando 1-12 de 52 artigos, teses e dissertações.
-
1. Evaluation of the Properties of LaNiO3 Material Prepared by the Modified Proteic Method for Adsorption of Environmental Contaminants
LaNiO3 material was synthesized by modified proteic method, calcined at 900 °C/2 h in air atmosphere and was applied to remove environmental contaminants. LaNiO3 phase with a perovskite structure was formed in the calcined material, which has a surface area of 22 m2 g-1 and is formed by fine particles agglomerated, with pH of the zero charge point of 7.44.
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Analysis and evaluation of structural properties of Co3O4 microparticles obtained at low temperature
Abstract In the present research, the synthesis of cobalt oxide Co3O4 was carried out using the sol-gel technique with subsequent heat treatment at 225 and 235 °C. The final product obtained was characterized by X-ray diffraction (XRD), showing a pure crystalline phase of Co3O4, cell parameters a=b=c=8.071 Å, and a volume of 525.7 Å3. The particle size wa
Cerâmica. Publicado em: 2022
-
3. In situ DEPOSITION OF COPPER NANOPARTICLES ON POLYETHYLENE TEREPHTHALATE FILTERS AND ANTIBACTERIAL TESTING AGAINST Escherichia coli AND Salmonella enterica
Abstract This study reports a synthesis of copper nanoparticles (CuNP) deposited on polyethylene terephthalate (PET) filters and antibacterial evaluation of the obtained filters against Escherichia coli and Salmonella enterica. CuNP were synthesized by a two-step method involving adsorption of [Cu(OH)4]2- ions onto a PET filter and subsequent chemical reduct
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
4. GLOBAL BUZZ: UMA META-ANÁLISE1
RESUMO O presente artigo propõe uma meta-análise da relação do global buzz, na criação do conhecimento e da inovação. Nos últimos anos houve um aumento substancial de pesquisas que reconhecem que a aquisição de conhecimento de empresas aglomeradas se processa por via de interações deliberadas com outros atores fora da concentração de empresas.
REAd. Rev. eletrôn. adm. (Porto Alegre). Publicado em: 25/11/2019
-
5. Fundente para Recargue por Soldadura con Arco Sumergido a Partir de Ferrocromo-manganeso y Escoria de la Reducción Simultánea de Cromita y Pirolusita
Abstract The obtaining of a flux for hardfacing by Submerged Arc Welding (SAW), using ferrochrome-manganese and slag obtained from the simultaneous carbothermal reduction of chromite and pyrolusite is addressed. The ferrochrome-manganese and the slag were obtained, conceiving that both products satisfy the requirements of the components (alloy system and ma
Soldag. insp.. Publicado em: 24/10/2019
-
6. Acid Leaching-Based Synthesis of CdS Yellow Ceramic Pigment with Discarded Ni-Cd Batteries
There is increasing interest in the ceramic industry in the development of pigments with intense tonalities that can be produced from low-cost alternative raw materials and also can fulfill technological and environmental requirements. This work reports on the preparation and characterization of CdS yellow ceramic pigment derived from Ni-Cd batteries through
Mat. Res.. Publicado em: 14/10/2019
-
7. Effect of The Incorporation of Micro and Nanoparticles of Calcium Carbonate in Poly (Vinyl Chloride) Matrix for Industrial Application
This study aimed at evaluating the effects of the incorporation of micro and nanoparticles of CaCO3 on the properties of poly(vinyl chloride) (PVC), intended to industrial application. The PVC compounds added with particles of different sizes were achieved in an intensive mixer. Rheological, microstructural, mechanical and thermal properties of the compounds
Mat. Res.. Publicado em: 14/10/2019
-
8. Determinants and spatial dependence of innovation in Brazilian regions: evidence from a Spatial Tobit Model
Resumo Este artigo busca analisar os determinantes da inovação, os padrões espaciais e a dependência espacial da inovação nas microrregiões brasileiras. Em concreto, ele avalia como o P&D das empresas locais, a pesquisa acadêmica regional, o nível de aglomeração e a especialização ou diversificação industrial da localidade afetam a inovação
Nova econ.. Publicado em: 10/10/2019
-
9. Configuração espacial em cidades aglomeradas: explorando os efeitos da atratividade do terciário na região da Serra Gaúcha, RS
Resumo O trabalho aborda as aglomerações urbanas e seus possíveis efeitos na estrutura espacial das cidades que as compõem. Uma aglomeração urbana pressupõe a existência de fortes inter-relações socioespaciais entre cidades próximas e complementaridade entre atividades (habitação, emprego, estudo, serviços, entre outras). O objetivo deste traba
urbe, Rev. Bras. Gest. Urbana. Publicado em: 03/10/2019
-
10. Addition of CeO2 Nanorods in PtSn-Based Electrocatalysts for Ethanol Electrochemical Oxidation in Acid Medium
This work describes the preparation of Pt/C, PtxSny/C and PtxSny(CeO2 nanorods/C) nanoparticle catalysts synthesized by the chemical reduction method via sodium borohydride for the ethanol oxidation reaction. Using X-ray diffractogram analysis, it was verified that no alloy formation occurred between platinum (Pt) and tin (Sn). The distribution of the nanopa
J. Braz. Chem. Soc.. Publicado em: 12/08/2019
-
11. Obtaining and characterizing dental hybrid composites with clay or silica nanoparticles and boron-aluminum-silicate glass microparticles
Abstract The aim of the present work was the obtaining and characterization of dental hybrid composites using nanoparticles (clay or silica) and boron-aluminum-silicate microparticles. We evaluated the dispersion of the nanofillers when changing their loading among 2.5%, 5%, 10% and 25% wt. Were tested, in the above quantities, four different types of nanofi
Polímeros. Publicado em: 27/06/2019
-
12. Propriedades de adesivo aplicado em painéis a partir da substituição por lignossulfonato do processo sulfito
Resumo Considerando a indústria de painéis aglomerados, a maior parte utiliza adesivos sintéticos, especialmente, à base de ureia-formaldeído, e nesse sentido, estudos que englobam as características de materiais alternativas para a indústria de painéis tornam-se importantes, especialmente quando se considera o custo final dos produtos gerados. O pre
Ciênc. Florest.. Publicado em: 30/05/2019