Advective Transport
Mostrando 1-10 de 10 artigos, teses e dissertações.
-
1. Comparison of 1D and 3D reservoir heat transport models and temperature effects on mass transport
RESUMO Modelos 1D e 3D de transporte de calor são comparados em um reservatório dentrítico no Brasil. Os períodos de estratificação para ambos modelos foram estimados usando índices físicos e gradientes de temperatura. O modelo tridimensional reproduz a temperatura da coluna d'água com mais acurácia, no entanto, o cálculo de índices físicos (nú
RBRH. Publicado em: 01/07/2019
-
2. A TVD scheme for 3d unstructured grids applied to compositional reservoir simulation
Abstract In reducing the grid orientation effect for the numerical solution of partial differential equations, interpolation functions play an important role when the advective transport of the governing equations is considered. This is due to the fact that, in general, the unknowns are evaluated in the vertices of the elements and such properties must be ex
Braz. J. Chem. Eng.. Publicado em: 2017-10
-
3. A posteriori error estimate for the contaminant transport equation in small advection regime / Um estimador de erro a posteriori para a equação do transporte de contaminantes em regime de pequena advecção
Vários modelos computacionais que implementam o transporte de soluto em meio poroso saturado surgem constantemente em publicações científicas devido à suma importância dada à compreensão e previsão do transporte de constituintes dissolvidos em água subterrânea. As soluções numéricas obtidas por esquemas computacionais não estão imunes aos err
Publicado em: 2010
-
4. Simulação numérica do escoamento bifásico em meios porosos heterogêneos empregando uma formulação semi-implícita, imitadores de fluxo e o método dos volumes finitos / Numerical simulation of two-phase flow in heterogeneous porous media applying a semi-implicit formulation, flux limiter and finite volume method
A new numerical method is proposed for the solution of two-phase flow problem in petroleum reservoirs. The two-phase (water and oil) flow problem is governed by a pressure-velocity equation coupled to a saturation equation. For computational eficiency an operator spliting technique is used; distinct time steps can be used for the computation of transport and
Publicado em: 2009
-
5. Stability of Semidiscrete Formulations For Advective-Diffusive-Reactive Transport Problems / Estabilidade temporal de formulações semi-discretas para problemas de transporte convectivo-difusivo-reativo
This work deals with the stability analysis of the fully discrete transport problem obtained using a stable finite element method in space and the generalized trapeizoidal family of methods in time. Depeding on the range of parameters the Galerkin and the Streamline Upwind Petrov-Galerkin Methods are introduced. We evaluate the accuracy and stability propert
Publicado em: 2006
-
6. Simulação numérica para difusão anisotrópica / Numerical simulation to anisotropic diffusion
The present work build a computational model using the finite volumes method for unstructured meshes, with the purpose of calculating the hydraulic load in a porous medium, considering it material non - homogeneous and anisotropic. The Anisotropy is a characteristic of many materials found in the nature and it depends on the property studied in this material
Publicado em: 2006
-
7. "Experimentos e modelagem numérica com aplicação ao Estuário Tropical do Rio Curimataú, RN" / Experiments and numerical model with application to the tropical estuary of the Catimataú river, RN
The distribution and variability of the termohaline properties and the three-dimensional circulation of the Curimataú river estuary had been studied with the application of the numerical model of simulations Delft3D-Flow, validated with experimental data measured during two consecutive cycles of neap and spring tide. Two numerical grids were applied with th
Publicado em: 2006
-
8. Effects of Motility and Adsorption Rate Coefficient on Transport of Bacteria through Saturated Porous Media
Three strains of Pseudomonas fluorescens with different motility rates and adsorption rate coefficients were injected into porous-medium reactors packed with l-mm-diameter glass spheres. Cell breakthrough, time to peak concentration, tailing, and cell recovery were measured at three interstitial pore velocities (higher than, lower than, and much lower than t
-
9. Biosorption of dichlorodiphenyltrichloroethane and hexachlorobenzene in groundwater and its implications for facilitated transport.
The potential for enhanced mobility of hydrophobic pollutants by cotransport with bacteria in saturated soils was evaluated from measurements of biosorption of 14C-labeled hexachlorobenzene and dichlorodiphenyltrichloroethane (DDT) to five strains of soil and sewage bacteria. The sorption process could be described by a linear partition equation and appeared
-
10. Development of Steady-State Diffusion Gradients for the Cultivation of Degradative Microbial Consortia
A diffusion gradient plate was constructed and evaluated for its potential use in the isolation of degradative microbial consortia from natural habitats. In this model, a steady-state concentration gradient of diclofop methyl, established by diffusion through an agarose gel, provided the carbon for microbial growth. Colonization of the gel surface was observ