Adsorption
Mostrando 1-12 de 3387 artigos, teses e dissertações.
-
1. Evaluation of the Properties of LaNiO3 Material Prepared by the Modified Proteic Method for Adsorption of Environmental Contaminants
LaNiO3 material was synthesized by modified proteic method, calcined at 900 °C/2 h in air atmosphere and was applied to remove environmental contaminants. LaNiO3 phase with a perovskite structure was formed in the calcined material, which has a surface area of 22 m2 g-1 and is formed by fine particles agglomerated, with pH of the zero charge point of 7.44.
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Preparation and performance of magnetic zirconium-iron oxide nanoparticles loaded on palygorskite in the adsorption of phosphate from water
Magnetic zirconium-iron oxide nanoparticles loaded on palygorskite as a low-cost adsorbent was produced by one-step co precipitation technique and its properties for phosphate adsorption were overall investigated. The Brunauer Emmett Teller (BET) specific surface area analysis, scanning electron microscopy (SEM), thermo gravimetric analysis (TGA), Fourier tr
Química Nova. Publicado em: 2022
-
3. ADSORPTION OF ATRAZINE IN RICE HUSK BIOCHARS: A PHENOMENOLOGICAL MODEL APPLIED TO EQUILIBRIUM AND KINETIC STUDIES
ABSTRACT Atrazine is an herbicide used to remove weeds in agricultural crops; however, because it is considered toxic, options for removing it from the environment are needed. Adsorption on biochar is an efficient technique for removing organic contaminants. In this study, the atrazine adsorption capacities of two biochars (BCA400 and BCA700) produced from r
Engenharia Agrícola. Publicado em: 2022
-
4. Doxazosin adsorption in natural, expanded, and organophilized vermiculite-rich clays
Abstract Vermiculite clays are adsorbent materials that have good chemical adsorption capacity, which makes them applicable in the removal of drugs from aqueous solutions. Their lamellar structure can be easily expanded and organophilized. To assess the efficacy and environmentally-tolerant capacity of the adsorption method, the organophilized vermiculite cl
Cerâmica. Publicado em: 2022
-
5. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
6. Evaluation of the influence of sodium and magnesium lignosulfonates on the hydration kinetics of cementitious paste
Abstract Motivated by their low cost, lignosulfonate-based water reducers are the most used type of admixture in the concrete industry worldwide. Due to the plurality of types of lignosulfonates (LSs) and the recent update to the Brazilian standard for admixtures for concrete, the objective of this work was to investigate the impact of sodium (Na-LS) and mag
Cerâmica. Publicado em: 2022
-
7. Structural Characteristics of Lignite Char from Different Pyrolysis Reactors and the Influence on Their Gasification Reactivity
The gasification reactivity of coal char is affected by numerous experimental variables, and char structure is one of the dominant factors. In this work, Raman spectroscopy, powder X-ray diffraction (XRD), and N2 adsorption were used to investigate the physical and chemical structure of char prepared under different pyrolysis conditions. Three kinds of pyrol
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
8. Development of a Disposable Pipette Extraction Method Using Coffee Silverskin as an Adsorbent for Chromium Determination in Wastewater Samples by Solid Phase Extraction
A procedure using disposable pipette tips adapted for solid-phase extraction, known as DPX SPE, was used as an alternative way for the chromium determination in wastewater samples. DPX-SPE consists of a device which allows a dynamic contact between the sample and the solid-phase. A residue obtained from the processing of coffee beans, denominate coffee silve
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
9. The influence of separately and combined bentonite and kaolinite as binders for pelletization of NaA zeolite from coal fly ash
Abstract Pelletization of zeolitic materials is required to facilitate their practical industrial and commercial applications. Zeolite-NaA was synthesized from fly ash by the fusion method and shaped into spherical granules. Bentonite, kaolinite, and a combination of bentonite with kaolinite were tested as binders with different contents from 5 to 10 wt%. Th
Cerâmica. Publicado em: 2022
-
10. PHOSPHORUS AVAILABILITY IN SOIL INCUBATED WITH BIOCHAR: ADSORPTION STUDY
RESUMO Considerando as perdas de fósforo (P) no solo pelo processo de adsorção e que o uso do biocarvão parece promissor do ponto de vista agrícola, objetivou-se com este estudo avaliar o processo de adsorção de P pelo solo Argissolo incubado com diferentes doses de biocarvão através de estudo cinético e isotérmico. O experimento foi realizado com
Revista Caatinga. Publicado em: 2022
-
11. Dispersive Solid-Phase Extraction Using 3-Mercaptopropyltrimethoxysilane Functionalized Magnetic MWCNT-Based Nanocomposite for Selective and Efficient Preconcentration of Pb2+ with FAAS Determination
A novel nanocomposite based on magnetic multiwalled carbon nanotubes coated with SiO2 and functionalized with 3-mercaptopropyltrimethoxysilane (3-MPTMS) was prepared for the efficient extraction and quantification of lead ions from water samples. The adsorption capacity of this adsorbent could reach 1.995 mg g-1 Pb2+ in an equilibrium time of 30 min. Under o
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
12. Enhancement of Visible Light-Responsive Photocatalytic Efficiency by Using a Laccaic Acid-Modified Titanium Dioxide Photocatalyst
In this study, a laccaic acid-modified TiO2 photocatalyst (Lac-TiO2) was prepared via an impregnation method with 0.50, 1.00, 2.50, and 5.00 wt.% laccaic acid. The products’ physical properties were examined through X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoemission spectroscopy (XPS), UV-Vis diffused
Journal of the Brazilian Chemical Society. Publicado em: 2022