Adsorption Column
Mostrando 1-12 de 162 artigos, teses e dissertações.
-
1. CHEMICAL REGENERATION OF BONE CHAR ASSOCIATED WITH A CONTINUOUS SYSTEM FOR DEFLUORIDATION OF WATER
Abstract Sources of fluoride contaminated water are found around the world and their treatment is required before human consumption. This paper contributes to advances in the use of bone-char as an adsorbent for fluoride, associating steps of chemical regeneration and fluoride adsorption in continuous systems, thereby making feasible the multiple use of the
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. SEPARATION OF SULFUR-CONTAINING COMPOUNDS FROM DIESEL BY OXIDATION FOLLOWED BY SOLVENT EXTRACTION IN A SINGLE DROP COLUMN
Abstract Oxidative desulfurization (ODS) is an attractive complementary or alternative process for the hydrodesulfurization (HDS) process due to advantages such as mild operating conditions. In the ODS process, the sulfur-containing compounds are oxidized first to polar sulfoxide and sulfone products and then these polar compounds are separated using solvent
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
3. SYNTHESIS, CHARACTERIZATION, ADSORPTION AND THERMODYNAMIC STUDIES OF PURE AND BINARY CO2-N2 MIXTURES ON OXYGEN ENRICHED NANOSTRUCTURED CARBON ADSORBENTS
Abstract Oxygen enriched porous carbons have been synthesized by a nanocasting technique using mesoporous zeolite as template and epoxy resin as precursor. Characterization results show the effect of the nanocasting technique on the development of heterogeneous surface, high basicity, and high surface area of 686.37 m2g-1, beneficial for CO2 adsorption. Pure
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
4. ESTIMATION OF PARAMETERS AND STATES USING A BAYESIAN PARTICLE FILTER FOR THE SULFATE ION ADSORPTION PROCESS IN A FIXED BED COLUMN
Abstract Ensuring that industrial effluents meet quality standards to be released into water bodies is still one of the major environmental concerns. Liquid phase adsoption in fixed bed collumns is one of the most known treatments. Measurements are needed to monitor the process. However, as they are often corrupted by noise from the measuring equipment, perf
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
5. Remoção do 2,4-D em amostras de águas pela adsorção em leitos fixos de carvão ativado granular em escala reduzida
RESUMO O objetivo deste trabalho foi avaliar, por meio dos testes rápidos de coluna em escala reduzida, a capacidade de adsorção do carvão ativado granular (CAG) na remoção do ácido 2,4-diclorofenoxiacético (2,4-D) em amostras de água ultrapura e de água filtrada proveniente de estação de tratamento de água. Os valores da capacidade de adsorçã
Eng. Sanit. Ambient.. Publicado em: 05/08/2019
-
6. REMOVAL OF BPA FROM LANDFILL LEACHATES USING FENTON-ADSORPTION PROCESS
The objective of this investigation was to identify and quantify the presence of Bisphenol-A (BPA) in raw and treated leachates with the Fenton-adsorption process. BPA is used as a monomer to produce epoxy resins and it is a compound classified as endocrine disruptor. For this reason, it is important to quantify its presence in effluents that will be dispose
Quím. Nova. Publicado em: 27/05/2019
-
7. Wastewater treatment using adsorption process in column for agricultural purposes
Resumo A água é um recurso essencial para vida, de extrema relevância para o ecossistema e encontra-se com várias problemáticas, entre elas a escassez. Por conta disso, o presente estudo foi desenvolvido a fim de propiciar a reutilização da água residuária da Estação de Tratamento de Água de Gramame para fins agrícolas. Assim, foi realizada a in
Rev. Ambient. Água. Publicado em: 04/02/2019
-
8. Adsorption/desorption characteristics and enrichment of quercetin, luteolin and apigenin from Flos populi using macroporous resin
Abstract In this study, the adsorption/desorption characteristics of quercetin, luteolin and apigenin from Flos populi extract (Populus tomentosa Carrière, Salicaceae) on twelve macroporous resins (NKA-9, HPD-600, HPD-826, HPD-750, HPD-400, DM-130, AB-8, SP-825, X-5, D-101, HPD-100, HPD-200) were evaluated. Both high adsorption and desorption capacities of
Rev. bras. farmacogn.. Publicado em: 2019-02
-
9. Selective Adsorption of AuIII from Aqueous Solution Using 2,5-Dimercapto-1,3,4-thiadiazole Modified Persimmon Tannin
A one-pot synthesized persimmon tannin (PT)-based novel biosorbent modified with 2,5-dimercapto-1,3,4-thiadiazole (DMTD) was prepared for the selective adsorption of AuIII from aqueous mixtures. The synthesized biosorbent was designated as DMTD-PT and characterized using elemental analysis, zeta potential, Fourier transform infrared (FTIR) spectroscopy and X
J. Braz. Chem. Soc.. Publicado em: 2018-07
-
10. Mathematical modeling of manganese adsorption onto bone char in a continuous fixed bed column incorporating backmixing and shriking core approaches
Abstract The present study investigated the dynamics of manganese adsorption onto bone char in a continuous fixed bed column using a mathematical model that incorporates: (i) the backmixing model to describe the fluid flow through the bed and (ii) the shrinking core model to describe the kinetic and mass transfer phenomena within spherical adsorbent particle
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
11. A Multi-Pumping Flow System with Pulsed Fluidization to Evaluate Soil Capacity for Phosphate Adsorption
Soils with high levels of iron and aluminum, thus negatively the phosphorous availability, affecting crop yields. A prior determination of the soil capacity to adsorb phosphate is relevant to attaining good agricultural performance. To this end, a multi-pumping flow system with pulsed fluidization is proposed. The procedure takes into account the amount of r
J. Braz. Chem. Soc.. Publicado em: 2017-07
-
12. HS-SPME optimization and extraction of volatile compounds from soursop (Annona muricata L.) pulp with emphasis on their characteristic impact compounds
Abstract Aroma and taste are decisive factors in the selection of any food. The aim of this study was to extract the volatile compounds present in soursop (Annona muricata L.) pulp by Solid-phase microextraction (SPME) technique using 3 different fibers (DVB/CAR/ PDMS, CAR/PDMS and PDMS/DVB). An experimental design was set up to evaluate the best extraction
Food Sci. Technol. Publicado em: 29/05/2017