Adhesives For Wood
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. STUDYING THE GRAMMAGE IN LVL PANELS GLUED WITH CASTOR OIL-BASED POLYURETHANE ADHESIVE: A POSSIBLE ALTERNATIVE TO FORMALDEHYDE RELEASING ADHESIVES.
ABSTRACT Efforts have been done in order to decrease the human dependence on petroleum materials. This idea can be applied for wood adhesives and wood products. This study proposes to evaluate laminated veneer lumber (LVL) panels of Hevea brasiliensis produced with castor oil-based polyurethane and resorcinol formaldehyde in different grammages. Six rubber t
CERNE. Publicado em: 2020-03
-
2. Painéis de pínus e bagaço de cana empregando-se dois adesivos para uso na construção civil
Resumo O presente trabalho objetivou produzir e avaliar painéis aglomerados empregando-se partículas de bagaço de cana-de-açúcar (Saccharum officinarum) e de pínus (Pinus taeda, Pinus elliottii), comparando-se a eficiência de dois adesivos, ureia-formaldeído e poliuretano derivado do óleo de mamona. Os painéis foram preparados com 60% de partícula
Ambient. constr.. Publicado em: 03/10/2019
-
3. Resistência mecânica à adesão em superfícies de madeira de pinus aplainadas e unidas por adesivos PVAc
RESUMO Este trabalho teve como objetivo analisar o desempenho de juntas coladas de madeiras da espécie Pinus elliottii com a utilização de dois adesivos comerciais à base de poliacetato de vinila (PVAc), com diferentes características físicas e composição química, ambos testados nas formas diluída em água e não diluída. As superfícies dos corpo
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Caracterização de painéis de partículas de média densidade feitos com resina poliuretana monocomponente à base de mamona
Resumo Dentre os fatores envolvidos na fabricação dos painéis destaca-se o tipo adesivo, em que o uso de novos pode resultar em boas propriedades aos materiais fabricados. Nesse contexto, esta pesquisa objetivou avaliar propriedades físicas e mecânicas de painéis de partículas fabricados com madeiras de Pinus sp. e de Eucalyptus grandis e unidas com r
Ambient. constr.. Publicado em: 2019-03
-
5. Technological Feasibility of Hovenia dulcis thunb. Species for the Production of Edge Glued Panels
ABSTRACT This study aims to evaluate the use of Hovenia dulcis wood to produce Edge Glued Panels – EGP. To this end, joints with dimensions of 5.0 × 31.0 × 2.5 cm (Width × Length × Thickness) were put together using polyvinyl acetate (PVAc) and emulsion polymer isocyanate (EPI) adhesives at a spread rate of 200 g.m-2 and the chemical characterization
Floresta Ambient.. Publicado em: 05/04/2018
-
6. Síntesse de novos estabilizantes poliméricos do tipo poli(álcool vinilico-co-neo decanoato de vinila) para utilização na copolimerização em miniemulsão do acetato de vinila (VAc) com o neo-nonanoato de vinila (VEOVA-9) / Synthesis of new poly(vinyl alcohol-co-vinyl neodecanoate) based polymeric stabilizers, to be used in the miniemulsion copolymerizatin of vinyl acetate (VAc) with vinyl neononanoate (VEOVA-9).
Due to the technological and industrial importance of latexes stabilized with poly(vinyl alcohol)/PVA and the difficulties related to the emulsion polymerization of hydrophobic monomers and the use of PVA having a high degree of hydrolysis (>92%), the synthesis of new PVA based polymeric stabilizers for use in emulsion and miniemulsion polymerizations become
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/04/2010
-
7. Theoretical and experimental analysis of wood I-beams for formwork purpose / Análise teórica e experimental de vigas de madeira de seção transversal "I" para uso em fôrmas para concreto
Due to the importance of wood in construction and the concern about the environmental impact, engineers have worried about the rationalization of its use through the development of engineered products, seeking the improvement of the technical properties. In this study, the I-beams built with reforestation wood were used for concrete formwork purpose. Their m
Publicado em: 2010
-
8. Biomaterial based novel polyurethane adhesives for wood to wood and metal to metal bonding
Polyurethane adhesives made from synthetic chemicals are non-biodegradable, costly and difficult to find raw materials from local market. To avoid solid pollution problem, cost effectiveness and easy availability of raw materials, biomaterials based polyurethane adhesives are used in current industrial interest. Direct use of castor oil in polyurethane adhes
Materials Research. Publicado em: 2009
-
9. Utilization of sugarcane bagasse from sugar/alcohol industry for particleboard production / Aproveitamento do bagaço de cana da indústria sucroalcooleira na produção de painéis aglomerados
The objective of this study was to evaluate the use of bagasse in the production of particleboards. The experimental design was planed with thirteen treatments to assess the effect of the panels in layers, levels and types of adhesives and their associations in the panels layers, and comparison of physical and mechanical properties of panels produced i labor
Publicado em: 2009
-
10. Pullout strength of axially loaded steel rods bonded in glulam at a 45º angle to the grain
This paper presents an experimental analysis of the pullout strength of bonded and axially loaded steel rods used as connector elements in log-concrete composite bridge decks. Static and cyclic tests were carried out to evaluate the fatigue of the connectors using two species of reforested wood, three types of commercial adhesives and three levels of wood mo
Materials Research. Publicado em: 2009
-
11. PROPRIEDADES FÍSICO-MECÂNICAS E RESISTÊNCIA A BIODETERIORADORES DE CHAPAS AGLOMERADAS CONSTITUÍDAS POR DIFERENTES PROPORÇÕES DE MADEIRA E CASCA DE ARROZ / PHYSICAL-MECHANICAL PROPERTIES AND DECAY RESISTANCE OF WOOD AND RICE HUSK PARTICLEBOARD IN DIFFERENT PROPORTIONS
This work aimed at evaluating the quality of particleboards manufactured with different wood proportions (Eucalyptus grandis W. Hill. ex Maiden) and rice husk. The composites were produced in the proportions 0, 20, 40, 60, 80 and 100% of peels of rice with the use of urea-formaldehyde and tannin-formaldehyde adhesives. In order to characterize the quality of
Publicado em: 2009
-
12. Efeito da adição de carga e extensor nas propriedades do adesivo uréia-formaldeído e dos compensados de pinus e paricá / Effect of the addition of filler and extender on urea- formaldehyde adhesives and on pinus and paricá plywood properties
The objective of this study was to evaluate the effect of the addition of extender (wheat flour) and filler (babaçu flour) on urea-formaldehyde adhesive properties and on quality of plywood manufactured with Pinus elliottii e Schizolobium amazonicum (paricá) veneers. Ninety six three-layer plywood were produced, being forty eight produced with Pinus elliot
Publicado em: 2009