Active Damping
Mostrando 1-12 de 31 artigos, teses e dissertações.
-
1. Conception, design and development of a low-cost intelligent prosthesis for one-sided transfemoral amputees
Introduction Modern transfemoral knee prostheses are designed to offer comfort and self-confidence to amputees. These prostheses are mainly based upon either a passive concept, with a damping system, or an active computational intelligent design to control knee motion during the swing phase. In Brazil, most lower extremity amputees are unable to afford mode
Res. Biomed. Eng.. Publicado em: 2015-03
-
2. Controle ativo de vibrações em estruturas flexíveis com incertezas paramétricas / Active vibration control of flexible structures with parametric uncertainties
The aim of this dissertation is to study the H-infinity robust control techniques for linear dynamic systems with parametric uncertainties. The finite element method was employed to find the model of the flexible structure. When dealing with the model, parametric uncertainties were considered for natural frequencies and for damping of the structure. The para
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/02/2012
-
3. Sistema de controle digital para retificador trifásico a quatro fios com filtro LCL / Digital control system for three-phase four-wire rectifier with LCL filter
Esta Dissertação de Mestrado propõe um sistema de controle digital para um retificador PWM trifásico a quatro fios com filtro LCL e elevado fator de potência de entrada. O sistema de controle proposto inclui uma malha interna de amortecimento ativo do pico de ressonância do filtro LCL, fazendo uso de um compensador em avanço. Além da malha de amortec
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/08/2011
-
4. Controle de vibração de um sistema sob desbalanceamento rotativo utilizando atuador de liga com memória de forma / VIBRATION CONTROL OF A SYSTEM UNDER UNBALANCED ROTATING USING SHAPE MEMORY ALLOY ACTUATOR
The vibration control is an important field of study within mechanical engineering, whose main objective is to reduce and control the vibration of a system. There are various techniques and methods for vibration control, and among them are those using dynamic vibration absorbers In this context, Shape Memory Alloys (SMA) can be used as actuators that help th
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/04/2011
-
5. Structural vibration control using extension and shear active-passive piezoelectric networks including sensitivity to electrical uncertainties
Active-Passive Piezoelectric Networks (APPN) integrate active voltage sources with passive resistance-inductance shunt circuits to a piezoelectric patch. This technique allows to simultaneously passively dissipate vibratory energy through the shunt circuit and actively control the structural vibrations. This work presents an analysis of active-passive dampin
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-09
-
6. On the effect of the near field records on the steel braced frames equipped with energy dissipating devices
The behavior of braced steel frame structures is of special importance due to its extensive use. Also the application of active and semi-active control systems, regarding to their benefits in obtaining better seismic performance has increased significantly. The majority of the works on steel structures and steel connections has been done under far field reco
Latin American Journal of Solids and Structures. Publicado em: 2011
-
7. Desenvolvimento de um sistema de suspensão com amortecimento semi-ativo "slow-active" com custo competitivo / Development of a suspension system with "slow-active" semi-active damping at a competitive cost
Neste trabalho é realizado o desenvolvimento de um sistema de suspensão semi-ativo adaptativo com baixo custo de implementação, quando comparado aos sistemas semi-ativos atualmente disponíveis no mercado. Para isto, foi caracterizado um sistema de amortecimento passivo variável controlado remotamente (com dispositivo seletivo alocado no painel do veíc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/07/2010
-
8. Influência da nanoargila no envelhecimento higrotérmico de compósitos de polipropileno / PP maleado / fibra de vidro / Influence of nanoclay on the hygrothermal ageing of polypropylene / maleated pp / glass fiber composites abstract
In short glass fiber (GF) reinforced polypropylene (PP) composites, despite of the chemically inert and non-polar nature of the matrix, the fiber-matrix interfacial integrity may be compromised in a hygrothermal active environment by the addition of maleic anhydride (MAH) molecules of the interfacial compatibilizer (PP-g-MAH). The use of organophilic nanocla
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/05/2010
-
9. Estabilização de oscilações de potencia de linhas de intercambio atraves de um elo de corrente continua / Stabilization of power lines interchange oscillations through a direct-current link
When an interconnected alternate-current power system suffers variations of loads, its frequency can exhibit an oscillatory behavior. If this system possesses a direct-current link in parallel with the inter-tie lines, this effect could be decreased, due to the link current controller action. This work presents a study that evaluates the efficiency of DC lin
Publicado em: 2009
-
10. DYNAMIC ANALYSIS OF A GEOSYNTHETIC REINFORCED EMBANKMENT / ANÁLISE DINÂMICA DE UM ATERRO REFORÇADO COM GEOSSINTÉTICOS
The main objective of this research is to investigate the seismic response of a soil slope reinforced with geosynthetics, located in an active seismic region of Peru. The 10.40m high slope was reinforced with 9 horizontal layers of geosynthetics 10m long. The aspects studied in this work are related to the slope static stability, the dynamic response of the
Publicado em: 2008
-
11. Projeto, construÃÃo e caracterizaÃÃo de um amortecedor ativo controlado por atuador piezoelÃtrico / Design, construction and characterization controlled by Piezoelectric Actuato
This thesis presents the design methodology, the construction of a prototype and the experimental validation of an active vibration damper witch is controlled by a piezoelectric actuator. The proposed device has two flexible metallic bellows connected to a rigid reservoir filled with a viscous fluid. When one of the bellows is connected to a vibrating struct
Publicado em: 2007
-
12. Lateral dynamics and stability analysis of a gas compressor supported by hybrid and active lubricated multirecess journal bearing
Fluid film forces are generated in multirecess journal bearings by two types of lubrication mechanism: the hydrostatic lubrication in the bearing recesses and hydrodynamic lubrication in the bearing lands, when operating in rotation. The combination of both lubrication mechanism leads to hybrid journal bearings (HJB). When part of hydrostatic pressure is als
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2006-12