Acrylic Resins
Mostrando 1-12 de 115 artigos, teses e dissertações.
-
1. Evaluation of flexural strength and antibacterial effect of orthodontic acrylic resins containing Galla chinensis extract
RESUMO Objetivo: Avaliar se diferentes concentrações de extrato de Galla chinensis (EGC) adicionado ao polimetilmetacrilato (PMMA), que é amplamente utilizado para a fabricação de aparelhos ortodônticos removíveis, interferem no efeito antimicrobiano desse extrato e na resistência à flexão do PMMA. Métodos: Foram preparadas amostras de resina a
Dental Press J. Orthod.. Publicado em: 2020-12
-
2. Evaluation of the physical and antifungal effects of chlorhexidine diacetate incorporated into polymethyl methacrylate
Abstract This study aimed to evaluate the physical properties and antifungal activities of polymethyl methacrylate (PMMA) acrylic resins after the incorporation of chlorhexidine diacetate salt (CDA). Methodology: First, acrylic resin specimens were fabricated with Vipi Cor® and DuraLay® resins with and without the incorporation of 0.5%, 1.0% or 2.0% CDA.
J. Appl. Oral Sci.. Publicado em: 10/01/2020
-
3. Antifungal efficiency of chemically and thermally-activated acrylic resins after surface treatment using poly (diallyldimethylammonium chloride)
Abstract INTRODUCTION: Acrylic resins are used in the preparation of facial prostheses and may be colonized by fungi. Here, we verified the antifungal efficacy of this material after surface treatment using poly (diallyldimethylammonium chloride). METHODS: Acrylic resin specimens with and without surface treatment were subjected to tests for fungistatic an
Rev. Soc. Bras. Med. Trop.. Publicado em: 30/05/2019
-
4. Characterization of hibiscus sabdariffa fiber as potential reinforcement for denture acrylic resins
ABSTRACT This study aimed to determine the characteristics of Hibiscus sabdariffa as a fiber-reinforcement material for denture acrylic resins. The Hibiscus sabdariffa fiber was extracted by hot water retting. The fiber was treated at room temperature in aqueous solution of NaOH for 8 hours at 8% concentration. Micrometre gauge and Field emission scanning el
Matéria (Rio J.). Publicado em: 06/12/2018
-
5. Porosity, water sorption and solubility of denture base acrylic resins polymerized conventionally or in microwave
Abstract The proper selection of polymerization cycle is important to prevent overheating of the monomer that could cause degradation, porosity and, consequently, deleterious effects on the denture base properties. Objective This study evaluated the porosity, water sorption and solubility of acrylic resins (Vipi Cril-VC and Vipi Wave-VW) after conventional
J. Appl. Oral Sci.. Publicado em: 07/05/2018
-
6. Waterborne hyperbranched alkyd-acrylic resin obtained by miniemulsion polymerization
Abstract Four waterborne hyperbranched alkyd-acrylic resins (HBRAA) were synthesized by miniemulsion polymerization from a hyperbranched alkyd resin (HBR), methyl methacrylate (MMA), butyl acrylate (BA) and acrylic acid (AA), by using benzoyl peroxide (BPO) and ammonium persulfate (AP) as initiators. The reaction between HBR and acrylic monomers was evidence
Polímeros. Publicado em: 08/12/2016
-
7. Silver nanoparticle incorporation effect on mechanical and thermal properties of denture base acrylic resins
ABSTRACT Objective The aim of the present study was to evaluate the mechanical and thermal characteristics of two denture base acrylic resins containing silver nanoparticles (AgNPs). Material and Methods Two different acrylic denture base resins (heat-polymerized and microwave polymerized) containing 0.3, 0.8 and 1.6 wt% AgNPs were evaluated for flexural
J. Appl. Oral Sci.. Publicado em: 2016-12
-
8. Effect of Polymerization Cycles on Gloss, Roughness, Hardness and Impact Strength of Acrylic Resins
Resumo O propósito neste estudo foi avaliar os ciclos de polimerização convencional e por fervura sobre o brilho, rugosidade, dureza e resistência ao impacto de resinas acrílicas. Amostras foram confeccionadas para cada resina Clássico ou QC-20 (n=20) em moldes de gesso obtidos de matrizes metálicas retangulares incluídas em muflas metálicas. A prop
Braz. Dent. J.. Publicado em: 2016-04
-
9. Influence of mouthwashes on the physical properties of orthodontic acrylic resin
AIM: The aim of this study was to evaluate the influence of acrylic resin immersion in different mouthwashes on hardness, roughness and color. METHODS: Specimens of an orthodontic self-cured acrylic resin (Orto Clas(r)) were produced and immersed in five mouthwashes: Plax(r) Classic (Colgate(r)); Plax(r) alcohol-free (Colgate(r)); Listerine(r) (Johnson
Braz. J. Oral Sci.. Publicado em: 2014-09
-
10. In vitro cytotoxicity of self-curing acrylic resins of different colors
OBJETIVO: avaliar, in vitro, a citotoxicidade de resinas acrílicas autopolimerizáveis, de diferentes cores, ao longo do tempo. MÉTODOS: os corpos de prova foram divididos em quatro grupos (n = 3), de acordo com a cor da resina acrílica utilizada (Orto Class, Clássico, São Paulo/SP), sendo: grupo 1, acrílica incolor; grupo 2, acrílica rosa; grup
Dental Press J. Orthod.. Publicado em: 2014-08
-
11. Effect of cleanser solutions on the color of acrylic resins associated with titanium and nickel-chromium alloys
This study evaluated the effect of cleanser solutions on the color of heat-polymerized acrylic resin (HPAR) and on the brightness of dental alloys with 180 immersion trials. Disk-shaped specimens were made with I) commercially pure titanium, II) nickel-chromium-molybdenum-titanium, III) nickel-chromium molybdenum, and IV) nickel-chromium-molybdenum beryllium
Braz. oral res.. Publicado em: 11/06/2014
-
12. Effect of different solutions on color stability of acrylic resin-based dentures
The aim of this study was to evaluate the effect of thermocycling and immersion in mouthwash or beverage solutions on the color stability of four different acrylic resin-based dentures (Onda Cryl, OC; QC20, QC; Classico, CL; and Lucitone, LU). The factors evaluated were type of acrylic resin, immersion time, and solution (mouthwash or beverage). A total of 2
Braz. oral res.. Publicado em: 17/12/2013