Acrylic Resin
Mostrando 13-24 de 239 artigos, teses e dissertações.
-
13. Characterization of hibiscus sabdariffa fiber as potential reinforcement for denture acrylic resins
ABSTRACT This study aimed to determine the characteristics of Hibiscus sabdariffa as a fiber-reinforcement material for denture acrylic resins. The Hibiscus sabdariffa fiber was extracted by hot water retting. The fiber was treated at room temperature in aqueous solution of NaOH for 8 hours at 8% concentration. Micrometre gauge and Field emission scanning el
Matéria (Rio J.). Publicado em: 06/12/2018
-
14. Effect of disinfection techniques on physical-mechanical properties of a microwave-activated acrylic resin
Abstract The effects of disinfection by microwave irradiation and immersion in peracetic acid on the physical-mechanical properties of a microwave-activated acrylic resin were evaluated. Specimens of acrylic resin were divided into a control group (specimens not disinfected) and 2 test groups subjected to one disinfection method: microwave irradiation at 85
Polímeros. Publicado em: 06/07/2018
-
15. Effect of different bonding protocols on degree of monomer conversion and bond strength between orthodontic brackets and enamel
Abstract The objective of the present study was to evaluate the effect of different surface treatments and polymerization protocols on the bond strength of brackets to enamel, and the degree of conversion of the bonding agents. 120 bovine crowns were embedded in acrylic resin blocks and sanded. Next, the blocks were randomly assigned into 12 groups. Metal br
Braz. oral res.. Publicado em: 11/06/2018
-
16. Porosity, water sorption and solubility of denture base acrylic resins polymerized conventionally or in microwave
Abstract The proper selection of polymerization cycle is important to prevent overheating of the monomer that could cause degradation, porosity and, consequently, deleterious effects on the denture base properties. Objective This study evaluated the porosity, water sorption and solubility of acrylic resins (Vipi Cril-VC and Vipi Wave-VW) after conventional
J. Appl. Oral Sci.. Publicado em: 07/05/2018
-
17. Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments
Abstract: The effects of several ceramic surface treatments on bond strength of a polymer-infiltrated ceramic network and resin composite as repair material were evaluated. CAD-CAM blocks of a polymer-infiltrated ceramic network (Vita Enamic) were sliced and subjected to aging process, followed by embedding in acrylic resin. The bonding/repair area was treat
Braz. oral res.. Publicado em: 05/04/2018
-
18. Push-out bond strength of different tricalcium silicate-based filling materials to root dentin
Abstract: The aim of this study was to evaluate the bond strength of different triccalcium silicate cements to retrograde cavity using a push out test. Thirty maxillary central incisors were shaped using #80 hand files and sectioned transversally. Root slices were obtained from the apical 4 mm after eliminating the apical extremity. The specimens were embedd
Braz. oral res.. Publicado em: 08/03/2018
-
19. Experimental study on waterproofing MDF with castor oil-based vegetal polyurethane
ABSTRACT This study aimed to analyze the waterproofing MDF with different coatings. For this, a comparative study was conducted with the following coatings on MDF: Vegetable polyurethane resin on castor oil-based, acrylic lacquer and marine varnish. To carry out the research, sewed up the samples in sequence, they received the coatings, and then we performed
Matéria (Rio J.). Publicado em: 10/08/2017
-
20. Bacterial endotoxin adhesion to different types of orthodontic adhesives
Abstract Bacterial endotoxin (LPS) adhesion to orthodontic brackets is a known contributing factor to inflammation of the adjacent gingival tissues. Objective The aim of this study was to assess whether LPS adheres to orthodontic adhesive systems, comparing two commercial brands. Material and Methods Forty specimens were fabricated from Transbond XT and
J. Appl. Oral Sci.. Publicado em: 2017-08
-
21. Effect of different composite core materials on fracture resistance of endodontically treated teeth restored with FRC posts
Abstract Objective This study evaluated the fracture resistance of endodontically treated teeth restored with fiber reinforced composite posts, using three resin composite core build-up materials, (Clearfil Photo Core (CPC), MultiCore Flow (MCF), and LuxaCore Z-Dual (LCZ)), and a nanohybrid composite, (Tetric N-Ceram (TNC)). Material and Methods Forty en
J. Appl. Oral Sci.. Publicado em: 2017-04
-
22. Waterborne hyperbranched alkyd-acrylic resin obtained by miniemulsion polymerization
Abstract Four waterborne hyperbranched alkyd-acrylic resins (HBRAA) were synthesized by miniemulsion polymerization from a hyperbranched alkyd resin (HBR), methyl methacrylate (MMA), butyl acrylate (BA) and acrylic acid (AA), by using benzoyl peroxide (BPO) and ammonium persulfate (AP) as initiators. The reaction between HBR and acrylic monomers was evidence
Polímeros. Publicado em: 08/12/2016
-
23. Silver nanoparticle incorporation effect on mechanical and thermal properties of denture base acrylic resins
ABSTRACT Objective The aim of the present study was to evaluate the mechanical and thermal characteristics of two denture base acrylic resins containing silver nanoparticles (AgNPs). Material and Methods Two different acrylic denture base resins (heat-polymerized and microwave polymerized) containing 0.3, 0.8 and 1.6 wt% AgNPs were evaluated for flexural
J. Appl. Oral Sci.. Publicado em: 2016-12
-
24. Tensile Bond Strength of a Soft Liner to an Acrylic Resin after Primer Application and Thermocycling
Purpose: The aim of this study was to evaluate the effect of a surface treatment with Sofreliner primer on tensile bond strength of a resin-based soft liner (Coe-Soft) bonded to a polymethylmethacrylate (PMMA) resin before and after accelerated aging simulated by a thermocycling machine. Material and Methods: One hundred and twenty rectangular specimens of
Mat. Res.. Publicado em: 04/12/2015