Absorption
Mostrando 13-24 de 6695 artigos, teses e dissertações.
-
13. QUANTITATIVE SPECIATION OF THE LIQUID PHASE BY FTIR SPECTROSCOPY IN THE SYSTEM AMP-PZ-CO2-H2O
This work reports a multivariate calibration partial least square regression (PLS) model to quantify the liquid-phase concentrations of 2-amino-2-methyl-1-propanol (AMP), piperazine (PZ), bicarbonate, PZ monocarbamate, and PZ dicarbamate during the absorption/desorption process by Fourier Transform Mid-Infrared spectroscopy (mid-FTIR). The model could predic
Química Nova. Publicado em: 2022
-
14. Influence of bottom ash and red mud additions on self-leveling underlayment properties
Abstract Self-levelling underlayments (SLUs) based on Portland cement (PC) are susceptible to cracking due to drying shrinkage. The present study evaluated the influence of binder contents on systems consisting of calcium aluminate cement (CAC), PC, and a source of calcium sulfate (C$), derived from the flue gas desulfurization process (FGD), on the mechanic
Cerâmica. Publicado em: 2022
-
15. Simple Spectrophotometric Determination of Iron in Diesel Oil after Sample Preparation Employing Extraction Induced by Emulsion Breaking
This work reports the development of a simple and fast method for the spectrophotometric determination of Fe in diesel oil using the classic reaction with 1,10-phenanthroline after its extraction induced by emulsion breaking (EIEB). The extraction parameters of EIEB were optimized (concentration of HNO3 and Triton X-100® in the emulsifying solution) as well
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
16. Study for the incorporation of wood ash in soil-cement brick
Abstract This study aimed to produce soil-cement brick with wood ash incorporation coming from the textile industry. The wood ash was a partial substitute for soil and cement in the manufacture of bricks. 7 formulations were made with different proportions of substitution: 10%, 20%, and 30%. It was noticed that the substitution of cement by wood ash in 10% r
Cerâmica. Publicado em: 2022
-
17. Effects of plaster to water ratio on physical and mechanical properties of ceramic pieces produced by the slip casting process
Abstract In the slip casting process, the relationship between the amount of plaster and water used in the production of molds influences the production of ceramic materials, because the higher the water content in the mixture, the lower the mechanical strength of the mold and higher the water absorption rate. In order to evaluate the influence of the variat
Cerâmica. Publicado em: 2022
-
18. Physical-mechanical behavior of alkali-activated materials produced by the one-part method based on fly ash and rice husk ash
Abstract The study on the physical-mechanical properties of alkali-activated materials (AAM) produced by the ‘one-part’ method was carried out. For this, residues such as fly ash and rice husk ash (RHA) were used. The alkaline activator (NaOH) was calcined together with RHA for 2 h at 750 °C. Dry mixes were prepared by replacing fly ash with 10%, 20%, a
Cerâmica. Publicado em: 2022
-
19. Influence of the Local Structure on the Photocatalytic Properties of Zinc Spinel Ferrite Nanoparticles
The correlation between iron distribution in octahedral or tetrahedral sites in synthetic magnetite and zinc spinel ferrites and their catalytic properties were investigated in this work. The zinc-doped nanomagnetites were prepared by co-precipitation method and annealed at 420 °C. X-ray diffraction, UV-Vis, X-ray absorption and 57Fe Mössbauer spectroscopi
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
20. A química analítica aplicada aos estudos de pigmentos rupestres: uma revisão
Instrumental advances have been employed in the study of archeological remains such as prehistoric rupestrians paintings with the objective of chemically characterizing them in order to reconstruct the cultural technologies of a prehistoric human group and/or to support conservation science studies. The analytical techniques most commonly used in archaeometr
Química Nova. Publicado em: 2022
-
21. Spectrofluorimetric Determination of Hydrochlorothiazide by a Carbon Dots-Based Probe via Inner Filtering Effect and Resonance Rayleigh Scattering
Synthesis of carbon dots (CDs) from natural resources not only enables green synthesis and production of environmentally friendly materials, but also provides a cost-effective probe as a fluorescence nanosensor. The proposed sensor introduces a unique one-pot hydrothermal CDs synthesis from alfalfa leaves, which is promising for sensing hydrochlorothiazide (
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
22. An alternative route to extract nickel and cobalt from non-commercial laterite ore
Abstract Laterite ores, which represent around two-thirds of nickel reserves, became an important source of nickel and cobalt metals. The objective of the present study was to investigate the efficiency of a hybrid route to extract nickel and cobalt present in a laterite ore sample which was not commercially attractive to be processed through the current rou
REM - International Engineering Journal. Publicado em: 2022
-
23. DEVELOPMENT AND OPTIMIZATION OF A SPECTROPHOTOMETRIC METHOD WITH CLOUD POINT EXTRACTION FOR DETERMINATION OF GADOLINIUM
This work describes a simple, sensible, and low-cost analytical method, based on cloud-point extraction (CPE) of the surfactant (1,1,3,3-Tetramethylbutyl)phenyl-polyethylene glycol (Triton X-114), for the efficient extraction and sensible determination of gadolinium after its complexation with 1-(2-pyridylazo)-2-naphthol (PAN) and subsequent determination by
Química Nova. Publicado em: 2022
-
24. Manufacturing and characterization of sustainable macroporous glass foams
Abstract This work produced glass foams from soda-lime glass bottles, bentonite, and alumina by the replica method. Compositions with different contents of bentonite (5, 10, 15, and 20 wt%) were prepared and heat-treated at 800 °C. In the alumina-added compositions, 50 wt% of the bentonite was replaced by the alumina. The influences of the content of benton
Cerâmica. Publicado em: 2022