Abaqus
Mostrando 1-12 de 124 artigos, teses e dissertações.
-
1. Análise comparativa numérica da transferência de calor em prismas de alvenaria em situação de incêndio
Resumo Opresente trabalho busca analisar numericamente a transferência de calor em prismas de alvenaria com blocos cerâmicos em situação de incêndio. Três tipos de abordagens foram consideradas: modelo homogeneizado com base na NBR 15220-2:2022, modelo detalhado com propriedades termofísicas constantes e modelo detalhado com propriedades térmicas var
Ambiente Construído. Publicado em: 2023
-
2. Análise teórica e experimental de ensaios de caracterização da interface entre bloco de concreto e argamassa
Resumo A alvenaria é um sistema construtivo que tem sido usado desde o início da civilização e ainda é usado em todo o mundo. O método dos elementos finitos é um desenvolvimento recente que permite resolver problemas complexos, incluindo problemas de alvenaria estrutural. Existe uma vasta quantidade de literatura sobre modelagem de elementos finitos,
Rev. IBRACON Estrut. Mater.. Publicado em: 2020-06
-
3. Modelo numérico de ligação mista viga-pilar entre piso misto de pequena altura e pilar preenchido
Resumo A utilização do sistema de piso misto de pequena altura, de aço e concreto tem-se dado, principalmente, devido às boas características estruturais e construtivas como a capacidade de vencer vãos consideráveis com baixa altura do sistema laje-viga. Apesar disso, há carência de estudos voltados ao comportamento das ligações entre o sistema de
Rev. IBRACON Estrut. Mater.. Publicado em: 2020-04
-
4. Analise experimental e modelamento por elementos finitos de ensaio de flexão biaxial de cerâmica Y-TZP
Resumo O objetivo deste estudo foi caracterizar e avaliar as propriedades físicas e mecânicas de uma zircônia experimental para aplicação odontológica e comparar os resultados da resistência à flexão biaxial com a simulação de elementos finitos (MEF). Amostras de zircônia tetragonal estabilizada com ítria (Y-TZP) foram sinterizadas a 1475 °C/2
Cerâmica. Publicado em: 2020-03
-
5. A simple spline finite strip for buckling analysis of composite cylindrical panel with cutout
Abstract In this study, a new sub-parametric strip element is developed to simulate the axially loaded composite cylindrical panel with arbitrary cutout. For this purpose, a code called SSFSM is developed in FORTRAN to analyze the buckling of panels. The first order shear deformation theory is used to form the strain-displacement relations. Spline and Lagran
Lat. Am. j. solids struct.. Publicado em: 30/09/2019
-
6. Global stability of buildings’ structural systems considering beam-wall connections
Resumo Diversos fatores influenciam a estabilidade das estruturas de concreto, como a altura das edificações, a rigidez dos elementos estruturais componentes, o sistema de contraventamento, a rigidez das ligações viga-pilar entre outros. A estabilidade global das estruturas é avaliada segundo a NBR 6118/2014 pelos parâmetros α e γz. Este trabalho obj
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019
-
7. Influencia de la geometría del proyectil en ensayos dinámicos de tracción
ABSTRACT The focus of this study is to discuss the influence of the projectile’s length on the results of an experiment of the Hopkinson Traction Bar (SHTB). Simulations have been made by means of finite elements using the commercial software ABAQUS in tests of traction at high speeds of deformation in samples of aluminum alloy 7017T73 varying the length o
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Thermal simulation of prisms with concrete blocks in a fire situation
Resumo O presente trabalho tem como objetivo verificar a capacidade de isolamento térmico de alvenarias constituídas por blocos de concreto em situação de incêndio por meio da simulação térmica de prismas. Inicialmente, para a validação das propriedades térmicas do bloco com um experimento fornecido por uma empresa, foi simulado um prisma com reve
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
9. The effect of concentrated transversal force on the moment resistance of rectangular hollow steel section beams
Abstract This article reports on a preliminary investigation about the effect of concentrated transversal force on the bending moment resistance of rectangular hollow steel section (RHS) beams. Two six-meter-long specimens with yield strength of 300 MPa and cross-section size of 250×150×6.4 mm were subjected to bending tests using a four-point load configu
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
10. Study on elastoplastic coupling mechanics model of the milled mixture of sugar cane
Abstract At present, the phenomenon of elastoplastic coupling isn’t considered in establishing the mechanics model of the milled mixture of sugar cane. In order to describe elastoplastic coupling and yield characteristics, based on uniaxial confined compression tests and direct shear tests, the evolution of the elastic parameters of the solid fiber with v
Food Sci. Technol. Publicado em: 11/04/2019
-
11. Experimental and numerical modeling of horizontally-bent buried pipelines crossing fault slip
Abstract The behavior and response of pipelines subjected to slip fault movement is studied by numerical simulations as well as experimental setup. A finite element modeling is also developed via ABAQUS software. In this study, an artificial accelerogram is applied to the system and matched against the response spectrum according to the standard No. 2800 (Ir
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
12. Influence of the Micromechanics Models and Volume Fraction Distribution on the Overall Behavior of SiC/Al Functionally Graded Pressurized Cylinders
Abstract The assessment of the differences in results obtained from various micromechanics homogenization schemes, as well as the implications of assuming different volume fraction profiles was carried out in the present work. The functionally graded composite chosen for the analysis was Al-SiC and comparisons were made in terms of stress and strain distribu
Lat. Am. j. solids struct.. Publicado em: 08/04/2019