A356 0 Alloy
Mostrando 1-10 de 10 artigos, teses e dissertações.
-
1. Spatial pattern of the environmental exposure to tin in the vicinity of an alloy industry in Volta Redonda, Rio de Janeiro State, Brazil
Resumo: O estanho é amplamente utilizado na indústria. A literatura sobre seus efeitos em humanos é escassa, principalmente quanto aos valores de referência em indicadores biológicos como sangue e urina. Também são raros os estudos sobre os limites do estanho no meio ambiente. O estudo teve como objetivo avaliar os pontos críticos da distribuição e
Cad. Saúde Pública. Publicado em: 14/10/2019
-
2. Relationship Between Aluminum-Rich/Intermetallic Phases and Microhardness of a Horizontally Solidified AlSiMgFe Alloy
An experimental study with an A356-AlSiMgFe alloy was developed to evaluate the microhardness performance in the microstructure resulting of an unsteady-state horizontal solidification process. The Al-7wt%Si-0.3wt%Mg-0.15wt%Fe alloy was elaborated and directionally solidified in a water-cooled horizontal solidification device. In order to experimentally dete
Mat. Res.. Publicado em: 23/11/2018
-
3. Evolución microestructural de una aleación de aluminio A356 con y sin reforzamiento. de SiC sometida a molienda mecánica
ABSTRACT The effect of milling time on the crystallite size, microstrain and Vickers microhardness, of an aluminum alloy A356 (Al-7wt % Si) with and without SiC reinforcement (15 wt%) was studied. The metal alloy powders were obtained by the rotating electrode process (REP) from cylinders of the alloy, the obtained powders present spherical morphology with a
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. The Effect of Cr Content on the Glass Forming Ability of Fe68-xCrxNb8B24 (x =8,10,12) Alloys
Based on the Fe60Cr8Nb8B24 alloy, reported in the literature as good Glass Forming Ability (GFA), in this study the GFA of two new compositions was proposed, Fe68-xCrxNb8B24 (x=10,12). They were evaluated as good candidates to be new compositions of Bulk Metallic Glasses (BMG) with better corrosion resistance due to the high Cr content. Rapidly solidified gl
Mat. Res.. Publicado em: 27/10/2016
-
5. Efeito da modificação com estrôncio na microestrutura e nas propriedades mecânicas da liga 356 / Effect of strontium on the microstructure and mechanical properties alloys 356
The properties of aluminum-silicon alloys are strongly dependent on the casting process used, the chemical additions made to control eutectic structure, primary silicon and grain structure, and molten metal treatment to reduce hydrogen gas content and to remove inclusions. Modification treatments transform the flake eutectic silicon into a fibrous form produ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
6. Efeito da Taxa de Resfriamento e dos Tratamentos Térmicos sobre as Propriedades Mecânicas da Liga Al-Si-Mg (A356.0) Fundida / Efeito da Taxa de Resfriamento e dos Tratamentos Térmicos sobre as Propriedades Mecânicas da Liga Al-Si-Mg (A356.0) Fundida
The A356.0 alloy is widely used in aerospace and automotive industry and other structural applications which require high mechanical strength. The control of solidification cooling rate and heat treatments are necessary to obtain more appropriate microstructures resulting in improvement of their properties. In this paper was evaluated the influence of coolin
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/12/2011
-
7. Tratamento de envelhecimento artificial das ligas 356 e a 356: efeitos da composição química, do tempo e da temperatura nas propriedades mecânicas / Artificial aging heat treatment of 356 and A356 aluminum alloy: effect of chemical composition, time and temperature on the mechanical properties
This study evaluates the effect of chemical composition and heat treatment of aging on the mechanical properties of aluminum alloy 356. The variables of heat treatment were the magnesium content, time and temperature. Additionally, the effect of alloying elements present as Fe and Mn were also evaluated by comparing with the A356 which is the purest version
Publicado em: 2010
-
8. Effect of solution heat treatment on microstructure and mechanical properties of A356 aluminum alloy / Efeito do tratamento térmico de solubilização na microestrutura e nas propriedades mecânicas da liga de alumínio A356 / Effect of solution heat treatment on microstructure and mechanical properties of A356 aluminum alloy / Efeito do tratamento térmico de solubilização na microestrutura e nas propriedades mecânicas da liga de alumínio A356
Este trabalho avalia os efeitos do tratamento térmico de solubilização sobre a microestrutura e as propriedades mecânicas da liga de alumínio A356. Foram fundidos corpos de prova para ensaios de tração e realizados tratamentos de solubilização em diversas condições de tempo e temperatura. A liga A356, com diferentes percentuais em peso de magnési
Publicado em: 2009
-
9. Influence of strontium content on the modification of A356 alloy. / Influência do teor de estrôncio na modificação da liga A356.
O objetivo deste trabalho foi o de otimizar a adição de estrôncio em liga A356 visando obter as melhores propriedades mecânicas de ductilidade. Foram estudados diferentes níveis de adição de estrôncio em ligas A356 com dois níveis de fósforo residual. Além disto, foi estudado o efeito de adições crescentes de magnésio na morfologia do silício
Publicado em: 2007
-
10. Estudo da corrosão intergranular em ligas de alumínio de fundição influências do teor de cobre e do tratamento de solubilização
It is well known that the element copper, even with an impurity level less than 0,3% modifies substancially the susceptibility to intergranular corrosion in alloys of commercial denomination 356 (nominal composition Al7Si0,3Mg). This paper aims to evaluate the influence of variations in the content of the element copper and the effect of thermal treatment of
Publicado em: 2006