3d Printing
Mostrando 13-24 de 41 artigos, teses e dissertações.
-
13. Magneto-Responsive Hydrogels: Preparation, Characterization, Biotechnological and Environmental Applications
Hydrogels are hydrophilic three-dimensional networks able to hold large amount of water and hydrophilic molecules. Magneto-responsive hydrogels comprise of magnetic nanoparticles dispersed in polymeric networks that can be manipulated under external magnetic field. This review aims at (i) giving a brief overview on the evolution of hydrogels until the design
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
14. EFFECT OF DISC-BLADE INTERCEPTING ANGLE ON MIXING PERFORMANCE IN A MULTIPHASE STIRRED VESSEL
Abstract The impeller geometry is a determining factor for mixing efficiency in a stirred vessel. In this study, the effect of disc-blade intercepting angle on power number, just suspended speed and mass transfer coefficient was investigated in a multiphase system under turbulent conditions. The impellers used in this study were fabricated with 3D printing.
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
15. A three-dimensional printed photopolymer resin implant for orbital rehabilitation for evisceration
RESUMO Objetivos: Avaliar a biocompatibilidade das esferas produzidas por impressora tridimensional em evisceração. Pacientes e métodos: Evisceração por olho cego doloroso foi realizada em 10 pacientes consecutivos (8 mulheres, idade média: 46.8 ± 14.2 anos). Os implantes esféricos foram produzidos pelo sistema de prototipagem rápida utilizando da
Arq. Bras. Oftalmol.. Publicado em: 29/08/2019
-
16. Using a 3D printer in cardiac valve surgery: a systematic review
RESUMO INTRODUÇÃO: A impressora 3D é utilizada como coadjuvante no planejamento de cirurgias de cardiopatias complexas. OBJETIVOS: Analisar o uso e os benefícios da impressão 3D em cirurgias de válvula cardíaca por meio de revisão sistemática da literatura. MÉTODOS: Esta revisão sistemática foi conduzida de acordo com os itens do Preferred Rep
Rev. Assoc. Med. Bras.. Publicado em: 22/07/2019
-
17. Development of a Patient-specific Guide for High Cervical Spine Fixation
Resumo Objetivos A fixação de coluna cervical alta pode representar um desafio para os cirurgiões de coluna devido à anatomia complexa e aos riscos de lesão vascular e medular. Os recentes avanços com a tecnologia de impressão 3 D abriram um novo leque de opções para os cirurgiões. Métodos Desenvolveu-se umguia para a adaptação de parafusos
Rev. bras. ortop.. Publicado em: 20/05/2019
-
18. Accuracy of 3D digital modeling of dental arches
RESUMO Objetivo: o objetivo do presente estudo foi verificar e comparar a precisão de modelos digitais de uma arcada dentária completa obtidos utilizando-se dois tipos de scanners e três metodologias de digitalização. Métodos: um modelo de resina feito com impressão 3D foi digitalizado em um scanner de referência (Zfx Evolution - Zimmer Biomet, Pa
Dental Press J. Orthod.. Publicado em: 2019-02
-
19. Simulador de dreno de tórax: desenvolvimento de modelo de baixo custo para capacitação de médicos e estudantes de medicina.
RESUMO Objetivo: criar, em impressora 3D, um simulador de baixo custo de caixa torácica humana que permita a reprodução da técnica de drenagem fechada de tórax (DFT) comparando sua eficácia com a do modelo animal. Métodos: foi realizada impressão 3D do arcabouço ósseo de um tórax humano a partir de uma tomografia de tórax. Após a impressão da
Rev. Col. Bras. Cir.. Publicado em: 17/01/2019
-
20. Consistency analysis of mechanical properties of elements produced by FDM additive manufacturing technology
ABSTRACT Additive manufacturing (AM) technology refers to the process of producing 3D objects by adding material in successive layers. Fused deposition modeling (FDM) is one of the AM technologies where objects are built by adding layers of melted thermoplastic filament onto the printing surface. Mechanical properties of FDM printed part depend on many influ
Matéria (Rio J.). Publicado em: 06/12/2018
-
21. Microstructure and Properties of 3D Printed Inconel 718 Joint Brazed with BNi-2 Amorphous Filler Metal
Three dimensional (3D) printing technology has been widely used in metal manufacturing industry. This study focused on the vacuum brazing of 3D printed Inconel 718 superalloy with BNi-2 amorphous filler metal. Interfacial microstructure and element distribution revealed excellent wettability and spreadability of the filler metal as well as favorable brazabil
Mat. Res.. Publicado em: 14/11/2018
-
22. Comportamiento al creep de un polímero utilizado para impresión 3D
ABSTRACT In recent years, additive construction or 3D printing technology is being widely used for manufacturing goods. This construction procedure has and will have a great industrial impact. There are several 3D printing processes, and among of them the most known is called Fused Deposition Modeling (FDM). The objective of the present paper is oriented to
Matéria (Rio J.). Publicado em: 19/07/2018
-
23. Caracterización de compositos biocerámicos en esponjas de titanio mediante interpenetración por corriente pulsada asistida
ABSTRACT Recently, it has been directing some special attention to the development of new manufacturing processes, with engineering applications in human tissues [1]. 3D printing applied to tissue engineering requires pulse computational techniques such as stereolithographic modeling, and special manufacturing processes, to name a few; Laser Sintering or Ext
Matéria (Rio J.). Publicado em: 19/07/2018
-
24. 3D Printing and its Effect on Outsourcing: A Study of the Indian Aircraft Industry
ABSTRACT: Indian Aircraft Industry has emerged as one of the rapid growing industrial endeavors in the world, with automation in most of its production and manufacturing areas. Technological advancements have led to this growth and, over the years, competitiveness has made the industry to efficiently look for avenues and other strategic alliances. In this di
J. Aerosp. Technol. Manag.. Publicado em: 26/02/2018