Wireless Communication Systems
Mostrando 1-12 de 93 artigos, teses e dissertações.
-
1. Comparison Between Three- and Four-coil Wireless Power Transfer Systems with Resonant Coils
Abstract In this paper, it is demonstrated that the efficiency and ability to transfer power to the load in three-coil wireless power transfer (WPT) systems are always higher than in equivalent four-coil ones. On the other hand, it is shown that there are features attainable in four-coil WPT system that are not in three-coil ones. For instance, in a four-coi
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
2. Should ethanol be considered a treatment for COVID-19?
Abstract This paper describes the analysis of the effects of a frequency selective surface (FSS) on the characteristics of a microstrip line fed antenna with a bow-tie slot in the ground plane for operation in the frequency range 1 to 10 GHz. The use of the FSS is proposed to miniaturize the antenna structure and increase the number of resonance frequencies
Rev. Assoc. Med. Bras.. Publicado em: 2020-09
-
3. Effects of an FSS Reflector on a Microstrip Line Fed Bow-Tie Slot Antenna
Abstract This paper describes the analysis of the effects of a frequency selective surface (FSS) on the characteristics of a microstrip line fed antenna with a bow-tie slot in the ground plane for operation in the frequency range 1 to 10 GHz. The use of the FSS is proposed to miniaturize the antenna structure and increase the number of resonance frequencies
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
4. Desenvolvimento de sistema de baixo custo para monitoramento de integridade estrutural
RESUMO O Monitoramento da Integridade Estrutural (MIE) pode ser utilizado para avaliar as condições de integridade de uma estrutura, ou ainda para verificar modelos de comportamento da mesma. Os atuais sistemas de monitoramento aplicados em grandes estruturas, contam com inúmeros sensores, dos mais variados tipos, que formam redes de comunicação, em alg
Matéria (Rio J.). Publicado em: 25/11/2019
-
5. A New Conductive Ink for Microstrip Antenna and Bioinspired FSS Designs on Glass and Fiberglass Substrates
Abstract This paper describes an investigation of the possibility of using a new conductive ink, insted of copper clad laminates, in the manufacturing of microstrip patch antennas on glass and fiberglass substrates and of bioinspired frequency selective surfaces (FSSs) on fiberglass substrates for wireless communication systems. The new conductive ink is dev
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
6. ELECTRONIC MONITORING SYSTEM FOR MEASURING HEART RATE AND SKIN TEMPERATURE IN SMALL RUMINANTS
Abstract The electronic monitoring of physiological responses is essential for managing animal production systems considering market demands for animal welfare. The objective of this study was to design, build, and test an electronic monitoring system, with recording and wireless transmission capability, for measuring the heart rate and skin temperature in s
Eng. Agríc.. Publicado em: 2018-04
-
7. Improved PLL-based MUSIC Algorithm for Single Receiver DF Systems
Abstract In this paper we propose an improved version of a single receiver DF system that combines a PLL scheme with the MUSIC algorithm to obtain both azimuthal and zenithal angles. The new approach uses a more efficient algorithm to remove the typical ambiguities of PLL-based schemes. We carry out several experiments to assess the algorithm performance. Am
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-12
-
8. A Compact UWB Bandpass Filter using Hybrid Fractal Shaped DGS
Abstract In this paper, a novel and compact ultra wideband (UWB) bandpass filter (BPF) based on fractal-shaped defected ground structure (DGS) is designed and developed. It is made of stepped impedance lines and a composite right/left handed-transmission line (CRLH-TL) constructed with capacitive gap in conductor strip and a hybrid fractal-shaped ring slot i
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-03
-
9. Maximum Power Transfer versus Efficiency in Mid-Range Wireless Power Transfer Systems
AbstractThe condition for maximum power transfer of 2-coils wireless power transfer (WPT) system is derived from circuit analysis and discussed together with the respective WPT system efficiency (η). In the sequence, it is shown that a 4-coils WPT system (which can be divided in source, two communication and load circuits) without power losses at the two co
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2015-06
-
10. Architecture for ES Receiver Systems Targeted at Commercial Wireless Communications
ABSTRACT: Modern electronic support (ES) systems are descended from systems intended for the detection of small numbers of high-power radar systems, and are thus not suitable for the low-power transmitters and dense signal environments typical of commercial communication networks. A new ES-system architecture is proposed to allow the detection of large numbe
J. Aerosp. Technol. Manag.. Publicado em: 2013-03
-
11. Metodologia para aplicação de RFID em automação : estudo de caso em um sistema de gestão / Methodology for RFID implementation in automation : case study in a management system
Radio-frequency identification (RFID) is an emerging technology with enormous potential for application. It can be used where there is a need to identify distant objects, wirelessly, with data transmission via radio signals, followed by its storage and process on computer systems, making them available for future use. As its applications permeates many busin
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/07/2012
-
12. Estudo da estabilidade tÃrmica da liga Ca(Nb1/2Bi1/2)xTi1-xO3:(B2O3)y para uso em antena ressoadora dielÃtrica (DRA) / Study of thermal stability of alloy Ca(Nb1/2Bi1/2)xTi1-xO3:(B2O3)y for use in dielectric ressonator antenna (DRA)
The field of wireless communication has undergone a revolutionary growth in recent decades. This is attributed to the invention of wireless mobile phones. The success of second generation (2G) services of cellular communication, motivates the development of broadband third generation (3G) mobile phones and other wireless products and services, such as Blueto
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/04/2012