Welding
Mostrando 1-12 de 506 artigos, teses e dissertações.
-
1. Effect of Welding Parameters on Nanostructured Fe-(C, B)-(Cr, Nb) Alloys
New nanostructured Fe-(Nb,Cr)-(C,B) multicomponent alloys have been developed for hardfacing application. They have better wear resistance than traditional Fe-Cr-C alloys. The nano-alpha-Fe, eutectic and hard carboborides phases of the weld metal usually show variations with the welding procedure. 6 test samples with different heat input were welded. It was
Mat. Res.. Publicado em: 20/01/2020
-
2. Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet
In this research work, a finite element model is developed to predict the temperature field and residual stress during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s heat source model which is based on Parabolic Gaussian distribution is used to predict the temperature field and Anand’s model is used to predict the residual stress. Numerical si
Mat. Res.. Publicado em: 20/01/2020
-
3. Effects of Geometrical Feature on Microstructures and Mechanical Properties of Refill Friction Stir Spot Welding 6061 Aluminum Alloy
Refill friction stir spot welding (refill FSSW) is a solid state joining technology developed and patented by Helmholtz-Zentrum Geesthacht. Refill FSSW is a welding process suitable for spot joining lightweight materials in similar and dissimilar joint configuration. The result is a spot welded in lap configuration with minimal material loss and a flat surfa
Mat. Res.. Publicado em: 17/01/2020
-
4. Towards Qualification of Friction Stir Welding to AA5083-O and AA5052-O Aluminum Alloys
Friction Stir Welding (FSW) is an excellent alternative for joining dissimilar and similar materials in comparison to conventional welding processes. In this sense, this work aims at qualifying FSW to similar AA5083-O and AA5052-O aluminum alloys, with 6.35 mm thickness, in a CNC machining center. Therefore, four welding experiments were undertaken. At first
Mat. Res.. Publicado em: 13/01/2020
-
5. Quantification of Discontinuities in Welded Joints Using Gamma Tomography
Gamma tomography was used in this work to evaluate the recurrent defects in welding processes in naval steel sheets. It was used a first-generation equipment consisting of a source of Cesium-137, with activity of the order of 200 mCi, coupled to a Thallium-doped Sodium Iodide detector, NaI (Tl). For the study, specimens were produced in ASTM A131-AH36 steel
Mat. Res.. Publicado em: 20/12/2019
-
6. Contributions of the High Frequency Dynamic Wire Feeding in the GTAW Process for Increased Robustness
Abstract: The GTAW process is recognized as a process of high metallurgical quality, being widely used in the pipelines welding, mainly in the root pass. The relative independence between the heat delivered to the melting pool and the amount of material added helps to control the melting of the material and to avoid the appearance of welding discontinuities
Soldag. insp.. Publicado em: 02/12/2019
-
7. Impacto nas Propriedades Mecânicas e Tensões Residuais do Material ASTM A572 Grau 50 Soldado por Arco Submerso com Alívio de Tensões Térmico
Resumo O aço ASTM A572 Grau 50 é utilizado na fabricação de conjuntos soldados para aerogeradores, por este motivo, a realização de alívio de tensões é de grande importância para correção dos impactos causados pelos processos de soldagem, bem como, o conhecimento das propriedades finais obtidas com a realização deste processo. O objetivo desse
Soldag. insp.. Publicado em: 02/12/2019
-
8. Efeitos da Espessura da Fita Metálica no Metal de Solda Utilizando Cavacos de Titânio Como Componentes do Fluxo em Arames Tubulares para a Formação de TiC
Resumo Cavacos de titânio foram utilizados como componentes do fluxo em arames tubulares fabricados a partir da conformação e trefilação de fitas metálicas com espessuras diferentes. Os arames apresentaram diâmetros internos com dimensões diferentes afetando as taxas de preenchimento do fluxo. Para as mesmas condições de soldagem, os arames fabric
Soldag. insp.. Publicado em: 02/12/2019
-
9. Efeito da Adição de Propileno aos Gases de Proteção Convencionais na Soldagem GMAW Aplicada a Juntas de Topo e Ângulo
Resumo O presente trabalho teve por objetivo avaliar a adição de 1,3% de C3H6 ao CO2 puro e 0,6% de C3H6 à mistura de Ar+25%CO2, na soldagem de aço carbono utilizando o processo Gas Metal Arc Welding (GMAW) aplicado em juntas de topo com chanfro em V e ângulo em T. As soldas foram realizadas utilizando chapas de aço SAE 1020, arame de solda ER70S-6 de
Soldag. insp.. Publicado em: 02/12/2019
-
10. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
11. Systematic review and meta-analysis of welding procedures in one-piece cast implant-supported frameworks
Abstract The objective of this systematic review and meta-analysis was to evaluate the effect of welding techniques on implant-supported prostheses and determine whether they contribute to a better adaptation compared with a one-piece cast. A search was conducted using the PubMed/MEDLINE, Embase, and Cochrane Library databases, and articles published until N
Braz. oral res.. Publicado em: 25/11/2019
-
12. Thermal Dissipation Effect on Temperature-controlled Friction Stir Welding
Resumo Durante a Soldagem por Fricção linear (FSW) de geometrias complexas, a dissipação térmica, induzida por características geométricas ou pelo ambiente circundante, desempenha um papel importante na qualidade final da junta. Para garantir uma qualidade consistente em condições diferentes é necessário a adaptacão de parâmetros durante o proce
Soldag. insp.. Publicado em: 25/11/2019