Titanium Alloys
Mostrando 1-12 de 129 artigos, teses e dissertações.
-
1. Characterization of Ti-35Nb alloy surface modified by controlled chemical oxidation for surgical implant applications
ABSTRACT Titanium-Niobium alloys have been studied for biomedical applications due to their satisfactory biocompatibility. In order to improve the long-term implantation, surface modification techniques have been developed to generate suitable topography, roughness, chemical composition, surface energy, etc. Considering this approach, the present work aimed
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Evaluation of two-step transformation in Ni-rich titanium-nickel alloys using thermal and internal friction analyses
ABSTRACT The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal anal
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Performance and Surface Integrity of Wire Electrical Discharge Machining of Thin Ti6al4v Plate Using Coated and Uncoated Wires
Wire Electrical Discharge Machining (WEDM) is one of the most important production technologies to manufacture very accurate small components and tools on any electrical conductive material. Titanium and its alloys have been widely used in automobile and aerospace industry as well as in medical engineering field. Small components and tools with complex geome
Mat. Res.. Publicado em: 03/06/2019
-
4. Oxidation Behavior of Al-Y Coating on γ-TiAl at 900°C
ABSTRACT In this study, an Al-Y coating was applied to enhance the property of oxidation resistance on the surface of γ-TiAl alloys by rf magnetron sputtering. The isothermal oxidation tests were investigated at 900 °C for 100 h. The coating characteristics and microstructure of coating after isothermal oxidation were inspected by XRD and SEM methods respe
Matéria (Rio J.). Publicado em: 20/05/2019
-
5. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
6. Nickel-Titanium Alloys Welding of Thin Sheets Using GTAW: Comparative Study Between Similar and Dissimilar Welding with AISI 304 Stainless Steel
The objective of the present work was to evaluate welding of thin sheets (thickness < 1 mm) of similar and dissimilar NiTi alloys with AISI 304 stainless steel using the Gas Tungsten Arc Welding (GTAW) process and to study the mechanical and metallurgical properties of the joints with and without post-welding heat treatment (PWHT). The GTAW process was chose
Mat. Res.. Publicado em: 08/11/2018
-
7. Nickel–titanium instruments in endodontics: a concise review of the state of the art
Abstract: The introduction of automated instrumentation in endodontics represented a major advance in progress for this specialty, with improvements in the quality and predictability of root canal preparation and a significant reduction in procedural errors. In recent years, endodontic instruments have undergone a series of changes brought about by modificat
Braz. oral res.. Publicado em: 18/10/2018
-
8. Effect of Hot Deformation on Microstructure, Hardness and Precipitation Kinetics in a C350 Maraging Steel Modified by Titanium Addition
Maraging steels are alloys with a good balance between strength and fracture toughness. These properties are obtained by quenching and aging treatments, where the precipitation of intermetallic compounds is promoted in a martensitic matrix. In this context, this paper aims to evaluate the effect of hot deformation on microstructure, kinetics and formation of
Mat. Res.. Publicado em: 17/09/2018
-
9. Efecto de la sustitución de V por Ti sobre las temperaturas de transformación de fase y el desajuste de red matriz/precipitado en la superaleación 76Fe-12Al-12V
ABSTRACT Fe-Al based alloys have a remarkable potential for high temperature structural applications, provided that the limitation of their low creep resistance is solved. Third element addition (Nb, Ti, Zr or Ta) has proven to per-form the task, at the expense of a low ductility. In previous works we have investigated ferritic alloys in the Fe-Al-V system w
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Estudio de la formabilidad en caliente de aleaciones de titanio a través del ensayo de torsión y su aplicación a la optimización de procesos de forja y extrusión
ABSTRACT In the development of hot metal forming, the metallic products must comply with the requirements imposed by current standards. In some cases, the required microstructure can only be obtained through thermomechanical processing. With titanium and its alloys, small ranges of good workability are an additional difficulty. In this work the hot-workabili
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Surface, microstructural, and adhesion strength investigations of a bioactive hydroxyapatite-titanium oxide ceramic coating applied to Ti-6Al-4V alloys by plasma thermal spraying
Ti-6Al-4V alloy is employed in implants because of its good mechanical strength, excellent biocompatibility, and good resistance to corrosion in biological environments. Herein, a composite (HAp-TiO2, 50% by volume of both components) coating surface employing Ti-6Al-4V was characterized. Samples were analyzed post fabrication and post heat treatment to anal
Mat. Res.. Publicado em: 28/05/2018
-
12. Materials Selection of Optimized Titanium Alloys for Aircraft Applications
The aim of the present work was to explore the correlation between the physical metallurgy of titanium alloys and its main attributes to select optimized materials for structural aircraft applications in the landing gear beam. The Ashby's method was employed as the materials selection strategy to consolidate and evaluate the data collected from the current l
Mat. Res.. Publicado em: 19/02/2018