Thermal Properties
Mostrando 1-12 de 1601 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
3. Microstructural characteristics, properties, synthesis and applications of mullite: a review
Abstract Mullite, an intermediate phase of the binary alumina-silica system, is one of the most important phases of ceramic products containing alumina and silica in the initial composition. Its stoichiometry ranges from 3Al2O3.2SiO2 (3:2) to 2Al2O3.SiO2 (2:1) and its crystalline structure is orthorhombic, characterized by the presence of octahedral chains o
Cerâmica. Publicado em: 2022
-
4. Quality Control for Lignin and Gelatin Microcapsules Loaded with Orange Essential Oil
Sustainable natural product-based microstructured systems and biopolymers are strong candidates for use in crop protection. Lignin and gelatin microcapsules loaded with orange essential oil were developed with spray-drying in order to enhance its potential. We evaluated the microparticle controlled release mechanisms, biological effects, structural and therm
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. Finite element computational development for thermo-mechanical analysis of plane steel structures exposed to fire
Abstract This article presents a numerical formulation based on finite element procedures for application in nonlinear thermo-mechanical analyses of steel planar structures under fire condition. The mechanical properties of structural elements degrade when subjected to high temperatures, resulting in significant reductions in strength and stiffness. Under th
REM - International Engineering Journal. Publicado em: 2022
-
6. Antioxidant Properties of Croton zehntneri Pax et Hoffm. Essential Oil and Its Inclusion Complex with β-Cyclodextrin Prepared by Spray Drying
Croton zehntneri Pax et Hoffm. is a plant from Northeastern Brazil, whose main component of its essential oil is estragole. Its thermal instability and low aqueous solubility prevent its technological application. This study aimed to prepare and characterize the Croton zehntneri essential oil (CZEO) complexed with β-cyclodextrin (β-CD), and to evaluate ant
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
7. BIODEGRADABLE SODIUM CARBOXYMETHYL CELLULOSE MEMBRANES CONTAINING MELALEUCA ESSENTIAL OILS FOR WOUND CARE MATERIAL
NaCMC is a biocompatible polymer that can be crosslinked with citric acid to form a gel matrix. Melaleuca oils have antimicrobial and anti-inflammatory properties with potential for wound healing. The goal of this work was to investigate the characteristics of NaCMC-Melaleuca oils gels. The gels were characterized by FTIR, TGA, mechanical analysis, and in vi
Química Nova. Publicado em: 2022
-
8. Thermal, structural and optical properties of magnetic BiFeO3 micron-particles synthesized by coprecipitation method: heterogeneous photocatalysis study under white LED irradiation
Abstract Bismuth ferrite, BiFeO3 (BFO) prepared via a coprecipitation method, was used as an effective photocatalyst for the degradation of methylene blue (MB) using a white light-emitting diode (LED-50 W) lamp. The as-prepared material was characterized by TGA, XRD, SEM-EDX, FTIR, and UV-vis-DRS techniques. The effects of experimental key parameters such as
Cerâmica. Publicado em: 2022
-
9. Effects of Intensification of Vaporization by Decompression to the Vacuum (IVDV) and frying on physicochemical, structural, thermal, and rheological properties of chickpea (Cicer arietinum L.) powder
Abstract Hard textural attributes of chickpea necessitate the employment of specialized pretreatment prior to roasting. As compared to frying, the Intensification of Vaporization by Decompression to the Vacuum (IVDV) as a vacuum expansion (VE) technique was utilized to improve and preserve the nutritional, textural, and structural properties of chickpeas. It
Food Sci. Technol. Publicado em: 2021-09
-
10. Evaluation of the properties of a foamed geopolymer developed with different types of metakaolin
Abstract The physical and mechanical properties of foamed geopolymers were determined. The geopolymers were made with two different metakaolins (from Metacaulim do Brasil - MB, and Pantano Grande/RS - MPG) as precursors, with NaOH and Na2SiO3 as activators, and with the addition of foam, which was produced with the foaming agent diethanolamide of coconut fat
Cerâmica. Publicado em: 2021-06
-
11. ERRATA
Abstract After natural fermentation and solar drying, sour cassava starch acquires expansion property. Traditionally, solar drying occurs without protection, and consequently physical contamination can arise. Thus, the aim of this study was to produce sour cassava starch using a low-cost solar dryer to prevent contamination, whilst retaining the expansion pr
Rev Bras Med Esporte. Publicado em: 2021-06
-
12. A Greener Enzymatic Oligoesterification of Biobased Renewable Synthons
Polyesters of xylitol and succinic acid were prepared yielding from 70 to 75% by enzyme-catalyzed esterification using a molar mass from 1:1 to 2:5 at 120 and 140 °C employing from 1 to 10% m/m of enzyme. Control over branching degree was achieved by tuning the reaction conditions (temperature, time, comonomer ratio, enzyme content). This one-step process f
J. Braz. Chem. Soc.. Publicado em: 2021-06