Thermal Conductivity
Mostrando 1-12 de 276 artigos, teses e dissertações.
-
1. Hydroponic cultivation of coriander intercropped with rocket subjected to saline and thermal stresses in the root-zone
ABSTRACT An experiment was carried out in a randomized blocks design, aiming at evaluation of the cultivation of coriander intercropped with rocket subjected to saline and thermal stresses in the root-zone. Six treatments were evaluated, as follows: four treatments consisted of the combinations of two levels of electrical conductivity of water (ECw 0.3 and 6
Revista Ceres. Publicado em: 2022
-
2. Microstructural characteristics, properties, synthesis and applications of mullite: a review
Abstract Mullite, an intermediate phase of the binary alumina-silica system, is one of the most important phases of ceramic products containing alumina and silica in the initial composition. Its stoichiometry ranges from 3Al2O3.2SiO2 (3:2) to 2Al2O3.SiO2 (2:1) and its crystalline structure is orthorhombic, characterized by the presence of octahedral chains o
Cerâmica. Publicado em: 2022
-
3. Evaluation of the properties of a foamed geopolymer developed with different types of metakaolin
Abstract The physical and mechanical properties of foamed geopolymers were determined. The geopolymers were made with two different metakaolins (from Metacaulim do Brasil - MB, and Pantano Grande/RS - MPG) as precursors, with NaOH and Na2SiO3 as activators, and with the addition of foam, which was produced with the foaming agent diethanolamide of coconut fat
Cerâmica. Publicado em: 2021-06
-
4. A Gas Chromatography Method for Simultaneous Quantification of Inorganic Gases and Light Hydrocarbons Generated in Thermochemical Processes
This paper reports a method for simultaneous determination of H2, O2, N2, CO, CO2, CH4, C2H2, C2H4, C2H6, C3H4 (propadiene and propyne), C3H6, C3H8 and C4H10 (n-butane and isobutane) by gas chromatography using thermal conductivity and flame ionization detectors. A single porous layer open tubular column (0.53 mm internal diameter ? 30 m length ? 30 µm thic
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
5. Thermoelectric properties of barium doped calcium cobaltite obtained by simplified chemical route
Abstract Calcium cobaltite (CCO) thermoelectric ceramics in Ca3Co4O9 and Ca2.95Ba0.05Co4O9 compositions were produced by a simplified chemical route developed in this study. Undoped ceramics sintered at 1193 K for 12 h presented a bulk density equivalent to 77% of the theoretical density, one of the highest values ever found for conventionally sintered undop
Cerâmica. Publicado em: 2021-03
-
6. ANODES FOR SOFC: REVIEW OF MATERIAL SELECTION, INTERFACE AND ELECTROCHEMICAL PHENOMENA
This paper presents a comprehensive interface and electrochemical phenomena review of different anodes for SOFC. In this way, it was possible to select some mixed electronic and ionic conductor materials alternatives to the conventional anode, Ni-YSZ conductor. New materials must present a satisfactory electronic and ionic conductivity at intermediate temper
Quím. Nova. Publicado em: 2021-01
-
7. PHYSICAL AND THERMAL PROPERTIES OF EUCALYPTUS WOOD CHARCOAL.
ABSTRACT The knowledge of the physical and thermal properties of eucalyptus charcoal is of fundamental importance in the design of equipment and development of cooling technologies. However, literature about physical properties for eucalyptus wood charcoal is largely unavailable, especially the thermal and aerodynamic properties, for the same material. The a
CERNE. Publicado em: 2020-03
-
8. Polyurethane/poly (Ionic Liquids) Cellulosic Composites and their Evaluation for Separation of CO2 from Natural Gas
The development of both versatile and inexpensive sorbents for CO2/CH4 separation has become one of the greatest challenges to the environment and natural gas processing. This study reports the preparation and characterization of polyurethane (PU)/ cellulose based poly(ionic liquid)(CPIL) composites for CO2/CH4 separation. PU matrix was reinforced with CPIL
Mat. Res.. Publicado em: 20/01/2020
-
9. PHYSICAL, MECHANICAL AND THERMAL BEHAVIOUR OF ADOBE STABILIZED WITH THE SLUDGE OF WASTEWATER TREATMENT PLANTS
ABSTRACT The need for treated water is essential for life. With the constant increase in population, the most common way to purify surface water is through conventional water treatment plants (WTPs). The high volume of residue (sludge) generated in this process is most often returned to the catchment site, negatively affecting the ecosystem. The sludge of WT
Eng. Agríc.. Publicado em: 09/12/2019
-
10. Thermal Conductivity and Mechanical Properties of As-Cast and As-Extruded Mg-Zn-Mn Alloys
As-cast and as-extruded Mg-[x]Zn-0.3Mn (x=1.5, 2.0 wt.%) alloys were prepared by means of medium-frequency induction-heating technique and extrusion process, respectively. The microstructural characteristics, thermal conductivity and mechanical properties of the samples were characterized. The research results show that the samples are composed of major α-M
Mat. Res.. Publicado em: 25/11/2019
-
11. Thermal Dissipation Effect on Temperature-controlled Friction Stir Welding
Resumo Durante a Soldagem por Fricção linear (FSW) de geometrias complexas, a dissipação térmica, induzida por características geométricas ou pelo ambiente circundante, desempenha um papel importante na qualidade final da junta. Para garantir uma qualidade consistente em condições diferentes é necessário a adaptacão de parâmetros durante o proce
Soldag. insp.. Publicado em: 25/11/2019
-
12. Lightweight high-strength concrete with the use of waste cenosphere as fine aggregate
RESUMO Cenosfera é um sub-produto da combustão do carvão que apresenta interessantes propriedades para ser usado na produção de materiais cimentícios, tais como estrutura oca, baixa densidade, baixa térmica condutividade e notável estabilidade térmica. Além disso, ela mostra reatividade pozolânica na cura térmica. Entretanto, o potencial da cenos
Matéria (Rio J.). Publicado em: 25/11/2019