Tensile Strength
Mostrando 1-12 de 846 artigos, teses e dissertações.
-
1. Methodology for evaluation of the influence of roughness and capillary absorption of ceramic blocks on the render’s tensile bond strength
Abstract The literature indicates that it is difficult or even impossible to associate with strong statistical confidence the bond strength of a mortar coating with the properties of the ceramic block, such as roughness and water absorption. In this work, it is assumed that the variability in capillary water absorption and roughness, and the use of methods t
Cerâmica. Publicado em: 2022
-
2. SYNTHESIS OF TOLUENE DIISOCYANATE URETHANE PREPOLYMER USING CASTOR OIL AND EVALUATION OF MECHANICAL PROPERTIES
This research is the synthesis of urethane prepolymer cast elastomer which had been produced using toluene diisocyanate and castor oil to replace the synthetic polyol, from petroleum origin, and the evaluation of mechanical properties of the polyurethane. The focus was to replace polyol from petroleum to vegetable material looking for renewable resources. Th
Química Nova. Publicado em: 2022
-
3. Effect of sintering temperature on mechanical and bioactivity properties of bioactive glass and cordierite composite
Abstract In this study, a composite of bioactive glass (BG) and cordierite (BG-cord) was proposed to increase the strength and bioactivity of BG. Both BG and cordierite were separately synthesized with the method of glass melting, then, they were used to fabricate BG-cord with a variation of sintering temperature (600 to 1000 °C). The highest diametral tens
Cerâmica. Publicado em: 2022
-
4. PHYSICAL AND MECHANICAL PROPERTIES OF THE BAMBUSA VULGARIS AS CONSTRUCTION MATERIAL
ABSTRACT The fabrication of traditional construction materials consumes a large amount of energy, emits pollutants, and utilizes nonrenewable raw materials. Therefore, it is important to reduce the environmental impact of construction through the use of eco-friendly materials, such as bamboo. This work presents the characterization of Bambusa vulgaris, which
Eng. Agríc.. Publicado em: 2021-04
-
5. MECHANICAL AND PHYSICAL PROPERTIES OF WOOD/POLYETHYLENE COMPOSITE REINFORCED WITH TIO2 NANOPARTICLES
ABSTRACT Wood plastic composite was fabricated using high density polyethylene and pine wood fiber. The effect of addition of TiO2 nanoparticles at different weight fractions (0%, 1%, 3%, and 5%) on some properties of the composite was examined. The experimental composites were tested for bending strength, tensile strength, Izod impact strength, thickness sw
CERNE. Publicado em: 2020-12
-
6. Microstructural and mechanical characterisation of the Simon Bolivar's iron bridge structure, 19th century, Arequipa, Peru
Abstract The microstructure of the main structural elements (Phoenix columns, transversal beams and tie-rods) of the Simón Bolivar iron bridge, located in Arequipa (Peru), was investigated. The bridge was supposedly designed by Gustave Eiffel and opened to the public in 1882. The characterisation revealed that the columns, beams and tie-rods are made of pud
REM, Int. Eng. J.. Publicado em: 2020-12
-
7. Antibacterial activity of polyvinyl alcohol (PVA)/ε-polylysine packaging films and the effect on longan fruit
Abstract Biodegradable and antimicrobial films via combing ε-polylysine (ε-PL) and polyvinyl alcohol (PVA) is a promising material for food packaging. We prepared the ε-PL/ PVA films with the ε-PL content of 0%, 1%, 3%, 5% and 7% (wt., relative to PVA) by casting method and their physical and chemical properties were characterized. SEM indicated the surf
Food Sci. Technol. Publicado em: 2020-12
-
8. Optimization and release evaluation for tea polyphenols and chitosan composite films with regulation of glycerol and Tween
Abstract In order to optimize the performance of chitosan-tea polyphenols composite films, effects of glycerol and Tween on the antioxidative activities and physical performance of chitosan composite films were evaluated. The results indicated that both flexibility and water vapour permeability of chitosan/tea polyphenols films were improved with the additio
Food Sci. Technol. Publicado em: 2020-03
-
9. APPARENT DENSITY AS AN ESTIMATOR OF WOOD PROPERTIES OBTAINED IN TESTS WHERE FAILURE IS FRAGILE
ABSTRACT The use of new wood species in construction requires knowledge of their properties for safer and more economical structural sizing. In Brazil, structural projects are carried out according to the standard document ABNT NBR 7190:1997. Tests required by this standard for the complete characterization of species require large machines with high costs,
Eng. Agríc.. Publicado em: 2020-02
-
10. Towards Qualification of Friction Stir Welding to AA5083-O and AA5052-O Aluminum Alloys
Friction Stir Welding (FSW) is an excellent alternative for joining dissimilar and similar materials in comparison to conventional welding processes. In this sense, this work aims at qualifying FSW to similar AA5083-O and AA5052-O aluminum alloys, with 6.35 mm thickness, in a CNC machining center. Therefore, four welding experiments were undertaken. At first
Mat. Res.. Publicado em: 13/01/2020
-
11. Stabilized mortar with air incorporator agent and plasticizer set retarder: performance measurement
Resumo Este estudo tem como objetivo desenvolver três argamassas estabilizadas para alvenaria com aditivo incorporador de ar e plastificante retardador de pega para comparar com uma argamassa convencional com cal. Foi analisado o índice de consistência, a massa específica, o teor de ar incorporado, a retenção da água, o tempo de pega através do calor
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
12. Fixation of the Anterior Ligament Graft at the Tibial Pole: Biomechanical Analysis of Three Methods
Resumo Objetivo Análise biomecânica comparativa da resistência da fixação tibial para reconstrução ligamentar com parafuso de interferência, comparada com parafuso do tipo poste com arruela, e com fixação associada entre os métodos (fixação híbrida). Métodos Foram utilizados 54 corpos de prova (tíbia suína e tendão digital bovino), que fo
Rev. bras. ortop.. Publicado em: 13/12/2019