Surface Roughness
Mostrando 1-12 de 549 artigos, teses e dissertações.
-
1. Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
Abstract The present investigation aimed at a sustainable green turning operation of Ti-6Al-4V alloy using multi-objective optimization of surface roughness, tool flank wear, material removal rate, and tool wear loss with cutting speed, feed rate, and depth of cut as input parameters. The experiments were performed on a CNC lathe machine using an alumina-zir
Cerâmica. Publicado em: 2022
-
2. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Effect of gastric acid on the surface roughness and bacterial adhesion of bulk-fill composite resins
Resumo O objetivo deste estudo in vitro foi avaliar o efeito do ácido gástrico na rugosidade superficial e na formação do biofilme nas resinas compostas de incremento único. Vinte e sete amostras de cada resina composta foram confeccionadas: G1: Filtek Z250 XT (Z250), G2: Filtek Bulk Fill (FTK), G3: Tetric N-Ceram Bulk Fill (TTC), and G4: Aura Bulk Fill
Brazilian Dental Journal. Publicado em: 2022
-
4. Numerical and experimental evaluation of the thermally stratified atmospheric boundary layer in wind tunnels
Abstract The atmospheric boundary layer (ABL) flow occurs due to the interaction between the Earth’s surface and atmosphere, and it usually happens under thermal stratification. Therefore, in order to emulate this phenomenon, atmospheric wind tunnels need appropriate devices, such as spires and cubical roughness elements, at the entrance of the wind tunnel
REM, Int. Eng. J.. Publicado em: 2021-01
-
5. A MULTIPLE CRITERIA ANALYSIS OF FACTORS INFLUENCING SURFACE ROUGHNESS OF WOOD AND WOOD-BASED MATERIALS IN THE PLANING PROCESS
ABSTRACT This paper presents a study of the fuzzy analytical hierarchy process (FAHP) for the prioritization of factors having important effects on the surface roughness of wood and wood-based materials in the planing process. Firstly, a three-level hierarchical model was devised. Secondly, the FAHP method was employed to determine the weights of the factor
CERNE. Publicado em: 2020-03
-
6. Effect of Etching Temperature on Surface Properties of Ti6Al4V Alloy for Use in Biomedical Applications
The objective of this study is to evaluate the surface physicochemical properties of Ti6Al4V alloy after etching with a piranha’s solution at temperatures of 25 °C, 40 °C, and 60 °C for 30 min. Scanning electron microscopy with energy-dispersive X-ray spectroscopy, optical profilometry, X-ray diffraction, and wettability analyses were used to characteri
Mat. Res.. Publicado em: 10/01/2020
-
7. Effect of Scanning Speed on the Surface Roughness of Laser Metal Deposited Copper on Titanium Alloy
This paper reports on the effect of scanning speed on the laser deposited Cu on titanium alloy substrate. The experiments were conducted by varying the scanning speed from 0.3 m/min to 1.2 m/min while the laser power, the powder feed rate and the gas flow rate were kept constant. The laser deposited Cu were characterized through the evolving microstructure a
Mat. Res.. Publicado em: 20/12/2019
-
8. Influence of cigarette smoke combined with different toothpastes on enamel erosion
Abstract: This in vitro study aimed to evaluate the effect of different toothpastes on dental enamel subjected to an erosive cycle with and without exposure to cigarette smoke. Bovine enamel specimens were randomly allocated into 12 groups (n = 12). For the in vitro simulation of smoking, half the groups underwent an exposure cycle of 20 cigarettes per day f
Braz. oral res.. Publicado em: 02/12/2019
-
9. Avaliação do efeito do tratamento a plasma sobre a superfície de filmes de polietileno verde e argila vermiculita
RESUMO O Polietileno (PE) Verde é um polímero sintético que apresenta baixa energia superficial, que resulta em fraca propriedade de adesão. Esta baixa adesão, provoca alguns problemas relativos às aplicações práticas dos polímeros, como fraca aderência de tintas de impressão, revestimentos, adesivos e metais à superfície do polímero, entre ou
Matéria (Rio J.). Publicado em: 25/11/2019
-
10. Efeitos do Processo de Refusão a Laser na Microestrutura e No Comportamento de Desgaste do Revestimento de WC Aspergido com HVOF
RESUMO O desgaste de componentes e equipamentos industriais e agrícolas representa um grande fator de depreciação de capital e de fonte de despesas com manutenção e reposição de componentes mecânicos. Como o desgaste é um fenômeno essencialmente superficial, envolvendo a remoção mecânica indesejável de material de superfícies, a solução estu
Matéria (Rio J.). Publicado em: 25/11/2019
-
11. Study of obtaining thin films of CeO2 doped with 2 and 4 mol% of europium, terbium and thulium by spin coating: photocatalytic properties
Resumo Neste estudo, filmes finos de CeO2 dopados com Eu3+, Tb3+ e Tm3+ nas proporções de 2 e 4 %mol foram obtidos por spin coating e calcinados em 700 °C. Os filmes foram caracterizados pelas técnicas de DRX, MEV, MFA e UV-vis. As propriedades fotocatalíticas dos filmes finos foram determinadas pela degradação do corante azul de metileno (AM). Os fil
Cerâmica. Publicado em: 14/11/2019
-
12. The effect of nanodiamonds on candida albicans adhesion and surface characteristics of PMMA denture base material - an in vitro study
Abstract Candida albicans is the main causative pathogen of denture stomatitis, which affects many complete denture patients. Objective: To evaluate the effect of different concentrations of nanodiamonds (NDs) added to polymethyl methacrylate (PMMA) denture base material on Candida albicans adhesion as well as on surface roughness and contact angle. Methodol
J. Appl. Oral Sci.. Publicado em: 04/11/2019