Sputtering
Mostrando 1-12 de 296 artigos, teses e dissertações.
-
1. Escores Prognósticos de Mortalidade na Cirurgia Cardíaca para Endocardite Infecciosa
Resumo Filmes de TiO2 dopados com Nb podem associar propriedades como TCO (transparent conductive oxide) e super-hidrofilicidade, quando ativados por luz UV. Filmes metálicos de Ti-Nb foram depositados sobre substrato de vidro via triodo magnétron sputtering e posteriormente os filmes foram oxidados em atmosfera ambiente a 600 °C durante 1,0 h em condiç�
Arq. Bras. Cardiol.. Publicado em: 2020-03
-
2. Efeito do teor de nióbio na molhabilidade de filmes TiO2:Nb
Resumo Filmes de TiO2 dopados com Nb podem associar propriedades como TCO (transparent conductive oxide) e super-hidrofilicidade, quando ativados por luz UV. Filmes metálicos de Ti-Nb foram depositados sobre substrato de vidro via triodo magnétron sputtering e posteriormente os filmes foram oxidados em atmosfera ambiente a 600 °C durante 1,0 h em condiç�
Cerâmica. Publicado em: 2020-03
-
3. Interrelation Among Morphology, Mechanical Properties and Oxidation Behavior of NbxAlyNz Thin Films
NbxAlyNz thin films were deposited by magnetron sputtering reactive technique with (y/x+y) ratio varying from 0 to 0.4, in order to maintain aluminum atoms inside NbN matrix in solid solution. GAXRD analyses revealed that the crystalline phase obtained for NbxAlyNz thin films was B1-NbN with a lattice constant shrinkage as Al concentration at these coatings
Mat. Res.. Publicado em: 07/11/2019
-
4. Influence of the Pre-Treatments and Process Temperature on the Adhesion of TiN Films Deposited by PBII&D Over Nitrided Austenitic Stainless Steel
In this work the influence of pre-treatment cleaning processes in the adhesion of TiN films deposited by the plasma based ion implantation and deposition (PBII&D) process over plasma nitrided AISI 316L stainless steel was investigated, varying the gas composition, the duration of the sputtering process and the temperature in the same deposition chamber. The
Mat. Res.. Publicado em: 28/10/2019
-
5. Modification of the Crystalline Structure of ZnO Nanoparticles Embedded Within a SiO2 Matrix due to Thermal Stress Effects
Self-assembled nanocrystals of ZnO were embedded within a SiO2 matrix by a sequential deposit using reactive R.F. sputtering. The ZnO nanoparticles (NP’s) were obtained by depositing a very thin layer (~20 nm) of Zn on the bottom of the valleys of a first SiO2 rough surface and then covered by another SiO2 layer at 500 ºC. The stress produced, due to the
Mat. Res.. Publicado em: 23/09/2019
-
6. Análise comparativa das propriedades elétricas de camadas e multicamadas de VOx depositadas por pulverização catódica para aplicação em bolômetros
RESUMO Filmes finos de VOX (camada e multicamadas) foram fabricados por pulverização catódica com rádiofrequência assistida por campo magnético constante para aplicação em detectores de radiação infravermelha do tipo bolômetro. As amostras foram fabricadas sem quebra de vácuo a partir de três alvos: V2O3; VO2 e V2O5. Um sistema de pulverização
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. Oxidation Behavior of Al-Y Coating on γ-TiAl at 900°C
ABSTRACT In this study, an Al-Y coating was applied to enhance the property of oxidation resistance on the surface of γ-TiAl alloys by rf magnetron sputtering. The isothermal oxidation tests were investigated at 900 °C for 100 h. The coating characteristics and microstructure of coating after isothermal oxidation were inspected by XRD and SEM methods respe
Matéria (Rio J.). Publicado em: 20/05/2019
-
8. Influência da densidade de potência e da porcentagem de N2 na atmosfera de deposição na dureza e no módulo de Young em filmes de aço inoxidável AISI 316 depositados por pulverização catódica
RESUMO O processo de recobrimento por pulverização catódica é uma técnica amplamente utilizada para produção de revestimentos metálicos e cerâmicos, devido a versatilidade no controle das propriedades com pequenas mudanças nos parâmetros de processo, como densidade de potência aplica ao cátodo magnetron e atmosfera de trabalho. Sendo assim, as p
Matéria (Rio J.). Publicado em: 20/05/2019
-
9. Al-doping and Properties of AZO Thin Films Grown at Room Temperature: Sputtering Pressure Effect
Aluminum zinc oxide (AZO) thin films were synthesized on glass substrates by radio frequency (rf) magnetron sputtering from a metallic Zn-Al (5 at. %) target at room temperature. The morphological, structural, electrical and optical properties of the films were studied as a function of the sputtering pressure, which was varied from 0.1 to 6.7 Pa. X-ray diffr
Mat. Res.. Publicado em: 09/05/2019
-
10. Nb-doped Ti2O3 Films Deposited Through Grid-Assisted Magnetron Sputtering on Glass Substrate: Electrical and Optical Analysis
Abstract Niobium doped dititanium trioxide (Ti2O3:Nb) films were deposited on glass substrates, through grid-assisted magnetron sputtering. The Ti2O3:Nb films were characterized by X-ray diffraction (XRD), electrical conductivity and optical properties. Film deposition was carried out in two different substrate bias modes: DC and unipolar pulsed. Results sho
Mat. Res.. Publicado em: 24/01/2019
-
11. Wear behavior of Diamond-like Carbon Deposited on Ti6Al4V Prepared with Surface Mechanical Attrition Treatment
Surface modification by deposition of hard coatings is a way to overpass the poor wear resistance of some metallic materials and one potential material is the Diamond-Like Carbon (DLC). We investigated the wear behavior, and the adhesion of the DLC deposited on a Ti6Al4V (Ti64) alloy after Surface Mechanical Attrition Treatment (SMAT). The SMAT was applied u
Mat. Res.. Publicado em: 21/01/2019
-
12. Tribological behavior of hydrogenated W-C/a-C:H coatings deposited by three different sputtering techniques
Abstract The evolution of structure, mechanical properties and friction behavior of DC magnetron sputtered (DCMS), high power impulse magnetron sputtered (HiPIMS) and high target utilization sputtered (HiTUS) W-C:H coatings was investigated as a function of the addition of acetylene and hydrogen into Ar atmosphere. The gradual addition of reactive gases caus
Cerâmica. Publicado em: 2019-01