Sofc
Mostrando 1-12 de 53 artigos, teses e dissertações.
-
1. ANODES FOR SOFC: REVIEW OF MATERIAL SELECTION, INTERFACE AND ELECTROCHEMICAL PHENOMENA
This paper presents a comprehensive interface and electrochemical phenomena review of different anodes for SOFC. In this way, it was possible to select some mixed electronic and ionic conductor materials alternatives to the conventional anode, Ni-YSZ conductor. New materials must present a satisfactory electronic and ionic conductivity at intermediate temper
Quím. Nova. Publicado em: 2021-01
-
2. Preparation and characterization of yttria stabilized zirconia (YSZ) films deposited by dip-coating on LSM-YSZ substrate with different proportions
ABSTRACT In this work, sol-gel/dip-coating process for obtaining yttria stabilized zirconia (YSZ, ZrO2–8% Y2O3) films deposited onto LSM-YSZ (lanthanum strontium manganite (LSM, La0.7Sr0.3MnO3) mixed with YSZ) with different proportions (20/80, 50/50, 80/20) was investigated. The films were deposited on substrate varying the number of layers deposited. LSM
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Study of NiO-GDC material produced by aqueous tape casting
ABSTRACT Studies have been developed in last decades in order to produce NiO-based material to be used as anode in solid oxide fuel cell (SOFC). Aqueous-based tape casting was used to produce NiO-GDC substrates with smooth and homogeneous surfaces and good flexibility. Physical and mechanical properties were obtained in green tapes sintered at temperatures r
Matéria (Rio J.). Publicado em: 08/01/2018
-
4. Electrical and microstructural characterization of Gd-doped Ceria/Y-doped Zirconia bi-layer electrolyte prepared by tape casting
ABSTRACT GDC-YSZ bi-layer SOFC electrolytes are an interesting manner to protect GDC electrolytes of the low oxygen partial pressure present at anode-electrolyte interface. This oxygen partial pressure condition and high temperatures during the operation of SOFC permit GDC electrolyte reduction injuring the performance of SOFC. In this work, GDC-YSZ bi-layer
Matéria (Rio J.). Publicado em: 22/05/2017
-
5. Evaluation of nickel and copper catalysts in biogas reforming for hydrogen production in SOFC
ABSTRACT The solid oxide fuel cells (SOFC) enable the efficient generation of clean energy, fitting the current requirements of the growing demand for electricity and for the environment preservation. When powered with biogas (from digesters of municipal wastes), the SOFCs also contribute to reduce the environmental impact of these wastes. The most suitable
Matéria (Rio J.). Publicado em: 22/05/2017
-
6. Optimization of spin-coated electrodes for electrolyte-supported solid oxide fuel cells
ABSTRACT Electrodes for electrolyte-supported solid oxide fuel cells (SOFC's) were fabricated by spin coating. Strontium-doped lanthanum manganite (LSM) cathode and nickel yttria-stabilized zirconia cermet anodes were synthesized and processed for enhanced deposition conditions. The influence of electrode microstructural parameters was investigated by a syst
Matéria (Rio J.). Publicado em: 22/05/2017
-
7. Effect of La 0.8 Sr 0.2 MnO 3 powder addition in the precursor solution on the properties of cathode films deposited by spray pyrolysis
ABSTRACT Films of lanthanum strontium manganite, LSM (La0.8Sr0.2MnO3) were deposited on yttria stabilized zirconia (YSZ) substrates by different methods aiming to establish the most suitable route to prepare cathodes for solid oxide fuel cells (SOFC). Samples were obtained by using a solution of lanthanum, strontium and manganese nitrates or a dispersion of
Matéria (Rio J.). Publicado em: 11/05/2017
-
8. Cromito de lantânio: material para interconectores de células a combustível de óxido sólido - uma revisão
O cromito de lantânio (LaCrO3) é um material cerâmico sintético, que apresenta como principais características boa condutividade elétrica em altas temperaturas (> 800 °C), estabilidade química e física em atmosferas oxidantes e redutoras e, significativa atividade catalítica quando na forma de pós. Estas características o tornam atrativo para div
Cerâmica. Publicado em: 2015-03
-
9. Nickel / Doped Ceria Solid Oxide Fuel Cell Anodes for Dry Reforming of Methane
Neste trabalho, foi estudado o desempenho catalítico de materiais a base de Ni, suportado em cério dopado com Zr, Pr e Nb para serem usados como anodos em células a combustível de óxido sólido (SOFC) alimentadas com combustíveis contendo metano e CO2. Os anodos foram preparados pelo método hidrotérmico, usando um teor de Ni (14% em volume) menor do
J. Braz. Chem. Soc.. Publicado em: 2014-12
-
10. Compatibility analyses of BICUVOX.10 as a cathode in yttria-stabilized zirconia electrolytes for usage in solid oxide fuel cells
Copper-substituted bismuth vanadate has been considered a promising material for composite cathodes in SOFC. However, high reactivity of BICUVOX.10 towards the electrolytes still has been its greatest shortcoming. This paper describes reactions between BICUVOX.10 and yttria-stabilized zirconia (YSZ) electrolytes. Secondary phases formed were evaluated by X-r
Mat. Res.. Publicado em: 30/09/2014
-
11. A Influência dos parâmetros de deposição na morfologia dos eletrólitos para células a combustível de óxido sólido, à base de filmes de zircônia: 8 mol% ítria depositados por spray pirólise
Foram produzidos filmes de zircônia estabilizada com 8 mol% de itria (8YSZ) por spray pirólise, que podem ser aplicados como eletrólitos de células a combustível de óxido sólido. A técnica de spray pirólise tem como vantagens ser de simples manuseio, baixo custo de operação, versátil e eficiente na obtenção dos filmes cerâmicos. Entretanto, co
Cerâmica. Publicado em: 2013-09
-
12. The effect of Pr co-doping on the densification and electrical properties of Sr-LaAlO3
Perovskite-type materials have been investigated extensively in the attempt to discover new electrolyte materials for solid oxide fuel cells (SOFC) operating at low temperatures. These materials include LaAlO3-based perovskite, which, when adequately doped, presents high ionic conductivity. However, despite the high conductivity of doped LaAlO3, two characte
Mat. Res.. Publicado em: 07/06/2013