Shear Strength
Mostrando 1-12 de 417 artigos, teses e dissertações.
-
1. Proposal of a failure envelope for artificially cemented sand
Abstract Soils are particulate materials, which often stand out for their low shear strength. In most cases, this aspect justifies adapting the geotechnical project for this characteristic, which can be even more problematic in the case of soft sands, since it often occurs in superficial layers in various parts of the metropolitan region of Fortaleza. Theref
REM - International Engineering Journal. Publicado em: 2022
-
2. Obtaining geotechnical parameters from correlations between geophysics and CPT tests in tailings dams
Abstract This article introduces a hassle-free methodology for geotechnical parameters to be obtained from correlations between geophysics and CPT field tests in tailings dams undergoing the decommissioning process, which are reasonably representative of site conditions, from the very early project stages, with extensive coverage of all impoundment parts, wi
REM, Int. Eng. J.. Publicado em: 2020-12
-
3. Improving shear bond strength of metallic brackets after whitening
RESUMO Objetivo: Avaliar um protocolo para colagem de braquetes metálicos após clareamento com peróxido de hidrogênio (PH). Método: Sessenta pré-molares superiores extraídos foram aleatoriamente divididos em um Grupo Controle (sem clareamento) e dois grupos que receberam clareamento, antes da colagem, com solução de peróxido de hidrogênio a 35%.
Dental Press J. Orthod.. Publicado em: 2020-09
-
4. Stabilization of sandy soil with high content of asphalt emulsion
Abstract The purpose of this article is to evaluate the shear strength parameters of mixtures of sandy soil with high asphalt emulsion contents for their use in geotechnical structures, such as zoned earth dams, embankments, etc. The methodology adopted consisted of: collecting and characterizing samples of sandy soil to be laboratory tested; compacting the
REM, Int. Eng. J.. Publicado em: 2020-06
-
5. Shear bond strength evaluation of metallic brackets bonded to a CAD/CAM PMMA material compared to traditional prosthetic temporary materials: an in vitro study
RESUMO Introdução: Atualmente, a demanda por tratamento ortodôntico em adultos tem aumentado. Consequentemente, também tem aumentado a necessidade de se colar braquetes em restaurações e coroas provisórias. O uso de restaurações provisórias de PMMA CAD/CAM com finalidade ortodôntica ainda não foi descrito e, até a presente data, não há infor
Dental Press J. Orthod.. Publicado em: 2020-05
-
6. Composite floor system with CFS trussed beams, concrete slab and innovative shear connectors
Abstract Steel and concrete floor systems are widely applied for buildings and provide excellent structural response, optimized material consumption, reduced beam height, and improved bending strength and stiffness capacity. In recent years, many experimental investigations concerned with new alternatives addressed to efficient interaction between steel and
REM, Int. Eng. J.. Publicado em: 2020-03
-
7. STUDYING THE GRAMMAGE IN LVL PANELS GLUED WITH CASTOR OIL-BASED POLYURETHANE ADHESIVE: A POSSIBLE ALTERNATIVE TO FORMALDEHYDE RELEASING ADHESIVES.
ABSTRACT Efforts have been done in order to decrease the human dependence on petroleum materials. This idea can be applied for wood adhesives and wood products. This study proposes to evaluate laminated veneer lumber (LVL) panels of Hevea brasiliensis produced with castor oil-based polyurethane and resorcinol formaldehyde in different grammages. Six rubber t
CERNE. Publicado em: 2020-03
-
8. EVALUATION OF POLY(VINYL ALCOHOL) ADDITION EFFECT ON NANOFIBRILLATED CELLULOSE FILMS CHARACTERISTICS
ABSTRACT In this study, based on the mechanical shear treatment, the cellulosic pulp was fibrillated in nanofibrils dispersed in aqueous suspension. Nanofibrillated Cellulose (NFC) matrix - Polyvinyl Alcohol (PVA) nanocomposite films’ were prepared by casting from NFC/PVA suspension mixtures. The thermal and mechanical properties of the obtained films were
CERNE. Publicado em: 2020-03
-
9. APPARENT DENSITY AS AN ESTIMATOR OF WOOD PROPERTIES OBTAINED IN TESTS WHERE FAILURE IS FRAGILE
ABSTRACT The use of new wood species in construction requires knowledge of their properties for safer and more economical structural sizing. In Brazil, structural projects are carried out according to the standard document ABNT NBR 7190:1997. Tests required by this standard for the complete characterization of species require large machines with high costs,
Eng. Agríc.. Publicado em: 2020-02
-
10. Effects of Geometrical Feature on Microstructures and Mechanical Properties of Refill Friction Stir Spot Welding 6061 Aluminum Alloy
Refill friction stir spot welding (refill FSSW) is a solid state joining technology developed and patented by Helmholtz-Zentrum Geesthacht. Refill FSSW is a welding process suitable for spot joining lightweight materials in similar and dissimilar joint configuration. The result is a spot welded in lap configuration with minimal material loss and a flat surfa
Mat. Res.. Publicado em: 17/01/2020
-
11. Light Activation and Thermocycling Methods on the Shear Bond Strength of Brackets Bonded to Porcelain Surfaces
Resumo No presente estudo foi avaliado o efeito de diferentes métodos de fotoativação e ciclagem térmica na resistência da união ao cisalhamento (RUC) e no índice de remanescente adesivo (IRA) de braquetes metálicos colados à cerâmica feldspática. Cem braquetes metálicos foram colados em 20 cilindros de porcelana, divididos em 4 grupos (n=25) de
Braz. Dent. J.. Publicado em: 2020-01
-
12. Effect of Yd:YAG laser irradiation on the shear bond strength of orthodontic metal brackets
RESUMO Objetivo: O objetivo do presente estudo foi avaliar o efeito da aplicação do laser Yd:YAG sobre a superfície metálica da base de braquetes ortodônticos, a resistência da colagem ao cisalhamento (RU) e os locais das falhas nas interfaces adesivas. Métodos: Os braquetes foram divididos em dois grupos, de acordo com o tipo de base: OP (One Piec
Dental Press J. Orthod.. Publicado em: 2020-01