Powder
Mostrando 1-12 de 1499 artigos, teses e dissertações.
-
1. Phonolite associated with organic compound and potassium solubilizing bacteria in tomato cultivation
ABSTRACT The use of rock dust in Brazil has been studied and encouraged to reduce the Brazilian dependence on the foreign market for chemical fertilizers and as an alternative to organic agriculture. The objective of this research was to evaluate the effects of using phonolite rock powder and organic compound, associated with inoculation with the potassium s
Revista Ceres. Publicado em: 2023
-
2. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
3. Pressed roofing tile based on cementitious material and basalt powder: Technological and toxicological characterization
Abstract This study aims to develop a pressed concrete roofing tile from powder technology containing basalt powder in substitution of fine sand (aggregate) for application in building covers. Specimens were submitted to technological and toxicological characterization. Hence, pressed specimens based on cement and basalt powder were analyzed. In the bending
REM - International Engineering Journal. Publicado em: 2022
-
4. Biogenic synthesis of silver nanoparticles from thyme extract for functionalization of a bioactive glass produced from rice husk ash
Abstract The rice husk, agro-industrial residue, stands out for having silica, the main oxide former of the bioactive glass. To avoid contamination in this biomaterial, substances with bactericidal properties, like silver can be incorporated. Thus, the objective of this work is the synthesis of silver nanoparticles to functionalize a bioactive glass synthesi
Cerâmica. Publicado em: 2022
-
5. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
6. Effect of two oral formulations of cannabidiol on responses to emotional stimuli in healthy human volunteers: pharmaceutical vehicle matters
Objective: To compare plasma concentrations of cannabidiol (CBD) following oral administration of two formulations of the drug (powder and dissolved in oil), and to evaluate the effects of these distinct formulations on responses to emotional stimuli in healthy human volunteers. Methods: In a randomized, double-blind, placebo-controlled, parallel-group desi
Brazilian Journal of Psychiatry. Publicado em: 2022
-
7. Danish Validation of a Retronasal Olfactory Powder Test and Development of a Novel Quick Retronasal Olfactory Test
Abstract Introduction Quality of life is closely linked to retronasal olfactory function. Familiarity with odors vary, so tests need validation. Testing can be time-consuming, so a quick test and a thorough test are needed for clinical and research settings. Objectives The objectives of this study were to validate the original retronasal powder olfactory t
International Archives of Otorhinolaryngology. Publicado em: 2022
-
8. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
9. Study of nanocomposites with carbon nanotubes and their tendency for carbon organization
Abstract The carbon derived from the thermal treatment of modified phenolic resins (PR) tends to organize into graphitic lamellae or turbostratic carbon and is commonly considered non-graphitizable. In this study, nanocomposites were synthesized with modified phenolic resin (Novolac) used as the matrix and oxidized multi-walled carbon nanotubes (NTox) in amo
Cerâmica. Publicado em: 2022
-
10. AMORPHOUS CUSEP2/GRAPHENE COMPOSITES AS ANODE MATERIAL FOR ADVANCED POTASSIUM-ION BATTERY
The ternary amorphous CuSeP2 was designed and prepared as the anode material of potassium ion battery for the first time, and its electrochemical performance was also investigated. After ball-milling with commercial graphene powder, it is used as the anode material for potassium ion battery with reversible specific capacity up to 300 mAh g-1, and the corresp
Química Nova. Publicado em: 2022
-
11. Structural Characteristics of Lignite Char from Different Pyrolysis Reactors and the Influence on Their Gasification Reactivity
The gasification reactivity of coal char is affected by numerous experimental variables, and char structure is one of the dominant factors. In this work, Raman spectroscopy, powder X-ray diffraction (XRD), and N2 adsorption were used to investigate the physical and chemical structure of char prepared under different pyrolysis conditions. Three kinds of pyrol
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
12. The influence of separately and combined bentonite and kaolinite as binders for pelletization of NaA zeolite from coal fly ash
Abstract Pelletization of zeolitic materials is required to facilitate their practical industrial and commercial applications. Zeolite-NaA was synthesized from fly ash by the fusion method and shaped into spherical granules. Bentonite, kaolinite, and a combination of bentonite with kaolinite were tested as binders with different contents from 5 to 10 wt%. Th
Cerâmica. Publicado em: 2022